Search found 5 matches

by radioguy7
Tue Jun 07, 2016 4:22 pm
Forum: RELM/Regency/Wilson
Topic: Relm RMV800 tx problem
Replies: 1
Views: 3997

Re: Relm RMV800 tx problem

Just a follow up on this. I went ahead and bought a new PA module from a Chinese vendor and installed it. That seemed to cure the problem. I think the reason the original PA failed was because there was a problem with the threads on the SO-239 antenna coax connector and it wasn't allowing the PL-259...
by radioguy7
Thu May 12, 2016 11:17 pm
Forum: RELM/Regency/Wilson
Topic: Relm RMV800 tx problem
Replies: 1
Views: 3997

Relm RMV800 tx problem

I bought an RMV800 vhf radio cheap that has a strange problem. When the radio is first turned on, it transmits just fine. It puts out close to 50 watts. Then after the radio is on for about 5-10 minutes and you key the mic, the red light comes on but the transmit wattage drops to zero. If you are li...
by radioguy7
Mon Aug 31, 2015 5:30 pm
Forum: Kenwood Commercial Products
Topic: TK-862H problems
Replies: 3
Views: 1004

Re: TK-862H problems

I purchased a new kpg-4 cable made by an American company and the problem is solved! I can read and write to the radios now with no problem. Thanks again for the help.
by radioguy7
Tue Aug 25, 2015 3:36 pm
Forum: Kenwood Commercial Products
Topic: TK-862H problems
Replies: 3
Views: 1004

Re: TK-862H problems

Thanks for the reply k2hz. I have been using a generic kpg-4 cable that works fine on a tk-880 that I have, but this is the first time I have tried using it on a tk-862. I'll see if I can get my hands on a genuine kpg-4 and see if that will make a difference.
by radioguy7
Mon Aug 24, 2015 9:42 am
Forum: Kenwood Commercial Products
Topic: TK-862H problems
Replies: 3
Views: 1004

TK-862H problems

I have three TK-862H radios that I can't seem to read or write to using the kpg-29d software. All I get is the Error!! Check connections message. I am using a kpg-4 cable that I have used with success on other radios, so I know it's not the cable. I am using the software on a couple of old windows 9...