Search found 11 matches
- Mon Mar 15, 2004 5:13 pm
- Forum: Kenwood Commercial Products
- Topic: TK720 External Speaker Connection
- Replies: 0
- Views: 2685
TK720 External Speaker Connection
Anyone have the pin outs for the 15 pin options connector? I need to connect an external speaker and still use the internal speaker of the TK720. Thank you for your help.
- Wed Feb 19, 2003 12:49 pm
- Forum: Kenwood Commercial Products
- Topic: TK730 Low External Speaker Audio
- Replies: 4
- Views: 5617
Re: lemme look
Don't worry about it....It's pins 12 and 6 not 13 and 14. I now have a manual on order.
Ridgerunner wrote:I am at home now, but when I am at work tommorow morning I will look at the service manual for you and see what I find.
Robert
- Tue Feb 18, 2003 7:17 pm
- Forum: Kenwood Commercial Products
- Topic: TK730 Low External Speaker Audio
- Replies: 4
- Views: 5617
TK730 Low External Speaker Audio
I connected an external speaker to pins 13 and 14. I removed the jumper between pins 9 and 12 for the internal speaker. The audio through the external speaker is extremely low (with speaker to your ear and full volume you can hardly hear noise). Are there any jumpers inside of the radio that need in...
- Thu Aug 08, 2002 3:24 pm
- Forum: Vertex
- Topic: Yaesu FTH-2008 Battery
- Replies: 1
- Views: 4178
- Mon Aug 05, 2002 11:54 am
- Forum: Vertex
- Topic: Yaesu FTH-2008 Battery
- Replies: 1
- Views: 4178
Yaesu FTH-2008 Battery
Hello,
Does anyone have a part number for the battery that works with this radio? I want to order a replacement battery and this battery has no part numbers on it. Jabro or other aftermarket battery numbers are fine too. Thanks, Dave.
Does anyone have a part number for the battery that works with this radio? I want to order a replacement battery and this battery has no part numbers on it. Jabro or other aftermarket battery numbers are fine too. Thanks, Dave.
- Wed May 01, 2002 6:33 pm
- Forum: Kenwood Commercial Products
- Topic: TK730 option connector
- Replies: 1
- Views: 3995
TK730 option connector
I guess I should just buy the manual, but....could someone please list the pinout of the 15 pin connector for the TK730? Or at least let me know what two pins are for the external speaker.
Thank you for any help, Dave.
Thank you for any help, Dave.
- Fri Apr 26, 2002 10:20 am
- Forum: Vertex
- Topic: VX-10 XMT/RCV
- Replies: 1
- Views: 4448
Re: VX-10 XMT/RCV
Most problems I encounter with the VX-10 is with the key pad. If you have one from a working radio try swapping the two. Check all the connections and remember, they have a three year warranty. I have a VHF VX-10 with no receive audio and VERY low transmit power ( about .3 watts on high power settin...
- Mon Feb 25, 2002 6:26 pm
- Forum: Kenwood Commercial Products
- Topic: TK 730 Ignition Sense
- Replies: 2
- Views: 5813
TK730 Ignition Sense
Thanks Kenwoody,
I'll give it a try.
I'll give it a try.
Kenwoody wrote: Remove top cover from radio (the smaller of the two covers) and cut W101. On the 15 pin connector on the rear, run accessory B+ to pin 3. This should do it.
- Fri Feb 22, 2002 7:20 pm
- Forum: Kenwood Commercial Products
- Topic: TK 730 Ignition Sense
- Replies: 2
- Views: 5813
TK 730 Ignition Sense
Hi, I have a Kenwood TK730 mobile radio that was originally connected with the main power and ground wires only, and wired hot. I want to have the radio turn on/off with the ignition key but with the main power wire connected to ingnition I have to manually turn on using the radio power button. I am...
- Thu Feb 21, 2002 11:49 am
- Forum: General Chatter
- Topic: Why....
- Replies: 1
- Views: 4327
Why....
did batlabs go down just weeks after this site was started? Alex, did you "trip" over their power cord?
Hurry up Batlabs, get back online!!!
Hurry up Batlabs, get back online!!!
- Fri Feb 08, 2002 11:28 am
- Forum: General Chatter
- Topic: BatLabs board?
- Replies: 5
- Views: 7356