Search found 94 matches

by jsikora
Tue Oct 02, 2012 8:47 am
Forum: Harris Public Safety Communications (PSPC) Equipment
Topic: In-cabinet repeat, Mastr 3
Replies: 4
Views: 2871

Re: In-cabinet repeat, Mastr 3

looking for this info or any info on making a MIII repeat in the cabinet. I toggle thru the repeater tab in options and only get none or back-to-back repeat options ?
by jsikora
Wed Mar 14, 2012 11:45 am
Forum: Icom Commercial Radios
Topic: Icom F80DS Firmware Update? MDC?
Replies: 2
Views: 1691

Re: Icom F80DS Firmware Update? MDC?

Current firmware is 2.8

you will also need Cloning 2.2 Software after the firmware update.
by jsikora
Wed Mar 14, 2012 11:40 am
Forum: Icom Commercial Radios
Topic: Icom F3s
Replies: 2
Views: 1941

Re: Icom F3s

Correct it is a dos program. It will not work with a USB adapter. You need a 9 pin for it to work correctly
by jsikora
Wed Mar 14, 2012 11:36 am
Forum: Vertex
Topic: VXR-7000 on Ham
Replies: 1
Views: 1719

VXR-7000 on Ham

A friend of mine has a VXR7000 UHF 450-470 Mhz that was donated to use on the local ham club. He was able to program it via the windows software fine, but now only has 700 MW output power. Is there a tunign procedure that needs to be done to get it to work on the ham bands ?
by jsikora
Sun Jan 09, 2011 6:04 pm
Forum: Icom Commercial Radios
Topic: IC-F320-S-6 and Narrow Band
Replies: 2
Views: 4028

Re: IC-F320-S-6 and Narrow Band

nope
by jsikora
Sun Jan 09, 2011 6:02 pm
Forum: Icom Commercial Radios
Topic: F521 scan setup help
Replies: 5
Views: 2621

Re: F521 scan setup help

Push and hold your scan button. Once it beeps then select up and down to get to the right scan list. Then hold scan till it beeps again and you are in that scan list
by jsikora
Sat Oct 24, 2009 7:55 pm
Forum: Kenwood Commercial Products
Topic: TK-240
Replies: 0
Views: 905

TK-240

OK, Dust off your cob webs. I found a old TK-240 portable in my SAR stuff. Originally this portable was programmed by jumpering 2 pins on the rear of the unit under a small cover. Well needless to say somone used a knife (as it was probably the easiest) and the rear panel is no longer able to get in...
by jsikora
Wed Oct 21, 2009 8:55 am
Forum: Midland
Topic: Titan Programming issues
Replies: 0
Views: 1759

Titan Programming issues

I am having issues programming/reading some titan radios. I purchased all the software and cables from Midland a few years ago. Programmed the radios originally and all was fine. Went to change some things and cannot read any of them. I have 1 UHF low power dash mount, 1 VHF low power dash mount and...
by jsikora
Thu Sep 24, 2009 2:27 pm
Forum: Icom Commercial Radios
Topic: IC-F121 Power on beep
Replies: 4
Views: 2419

Re: IC-F121 Power on beep

delete power on text.
by jsikora
Thu Jul 02, 2009 10:06 am
Forum: Icom Commercial Radios
Topic: icom ic-f33gs from an non mdc to a mdc portable
Replies: 3
Views: 2167

Re: icom ic-f33gs from an non mdc to a mdc portable

The original radio was not capable of MDC signalling. You can try changing the model on the radio and write one channel to it. I'm guessing it is an early version and will not take it. If it is the early version you cannot change it to MDC.
by jsikora
Sat Jun 27, 2009 8:17 am
Forum: Icom Commercial Radios
Topic: 2821 mobile 450-520 down to 440
Replies: 3
Views: 2138

Re: 2821 mobile 450-520 down to 440

I had the VHF version of this radio and had numerous ham frequencies in the radio. I also have 3 different flavors of ICOM UHF Mobiles with HAM freqs, including the 521, 221, and 420. I am assuming yes.
by jsikora
Sat Jun 27, 2009 8:17 am
Forum: Icom Commercial Radios
Topic: 2821 mobile 450-520 down to 440
Replies: 3
Views: 2138

Re: 2821 mobile 450-520 down to 440

I had the VHF version of this radio and had numerous ham frequencies in the radio. I also have 3 different flavors of ICOM UHF Mobiles with HAM freqs, including the 521, 221, and 420. I am assuming yes.
by jsikora
Sat Jun 27, 2009 8:16 am
Forum: Icom Commercial Radios
Topic: 2821 mobile 450-520 down to 440
Replies: 3
Views: 2138

Re: 2821 mobile 450-520 down to 440

I had the VHF version of this radio and had numerous ham frequencies in the radio. I also have 3 different flavors of ICOM UHF Mobiles with HAM freqs, including the 521, 221, and 420. I am assuming yes.
by jsikora
Sat Jun 27, 2009 8:12 am
Forum: Icom Commercial Radios
Topic: OPC-966 Programming Cable Schematics??????
Replies: 1
Views: 2270

Re: OPC-966 Programming Cable Schematics??????

ICOM uses a RIB type circuit in the programming cable. It is not a easy cable to rebuild.