I did just that a few years ago, but I had to order and install the low split low band VCO unit to make it work, but it did setup all ok .
73,
Lorne
Search found 27 matches
- Fri Mar 06, 2015 9:37 pm
- Forum: Vertex
- Topic: CE7 on 10 meters
- Replies: 2
- Views: 8195
- Fri Mar 06, 2015 9:27 pm
- Forum: Vertex
- Topic: VX-3000V 2 Meters?
- Replies: 2
- Views: 7689
Re: VX-3000V 2 Meters?
Just a follow up regarding the Vertex VX-3000V 50 watt radio. The radio will program from 134 - 174 MHz and works well in the 144-148 MHz range. This one I picked up on EBay I programmed for 145.010 MHz (packet) with a receiver SINAD of 0.17 uv with TX power adjustable via CE19D software to 50 watts...
- Fri Feb 20, 2015 10:23 pm
- Forum: Vertex
- Topic: VX-3000V 2 Meters?
- Replies: 2
- Views: 7689
VX-3000V 2 Meters?
Just wanted to know if the VX-3000V radio will program and function ok in the 144-148 MHz range?
73, Lorne
73, Lorne
- Wed Apr 18, 2012 10:02 pm
- Forum: Vertex
- Topic: VXR-9000 to UHF Ham Band
- Replies: 7
- Views: 22604
Re: VXR-9000 to UHF Ham Band
You have to go into dealer mode (-d ) and goto the alignment section tweak the RX TUNE lowest to highest frequency range and then write to it.
If you want, send me an email and I will create a code file for your frequency.
73, Lorne
VE1BXK
If you want, send me an email and I will create a code file for your frequency.
73, Lorne
VE1BXK
- Wed Apr 18, 2012 9:50 pm
- Forum: Vertex
- Topic: CE20 Programming
- Replies: 5
- Views: 12357
Re: CE20 Programming
You have to use an DOS 6.22 or win95/98 (in dos mode) for the software can communicate properly to the com port.
73, Lorne
VE1BXK
73, Lorne
VE1BXK
Re: VXR-7000
I have a VXR-7000U unit programmed in the 70 cm band and works finest kind.
73, Lorne
VE1BXK
73, Lorne
VE1BXK
- Wed Apr 27, 2011 7:14 pm
- Forum: Vertex
- Topic: VXR-9000U Reference Freq Adjust
- Replies: 8
- Views: 12396
Re: VXR-9000U Reference Freq Adjust
What frequency are you programmed for?
- Sun Dec 26, 2010 7:18 pm
- Forum: Icom Commercial Radios
- Topic: Icom IC-M710 HF Marine SSB
- Replies: 0
- Views: 8844
Icom IC-M710 HF Marine SSB
I have worked on these radios in the past, but never had the chance to try them on the HAM Bands. Has anyone got one to work the HAM Bands? I have heard they will do 1.6 -30 Mhz AM/USB-LSB/RTTY/CW.
I see a few on Ebay listings ...
Lorne
VE1BXK
I see a few on Ebay listings ...
Lorne
VE1BXK
- Wed Oct 07, 2009 10:45 am
- Forum: Harris
- Topic: RF-3200 Password Access
- Replies: 0
- Views: 11640
RF-3200 Password Access
RF-3200 Password Access Formula:
(serial # x serial #) + 42747 = (password #)
For unit with S/N's in the high 2000's:
(serial # x serial #) + 42747 - 8388608 = (password #)
serial # = S/N of the radio[/b]
Cheers!
(serial # x serial #) + 42747 = (password #)
For unit with S/N's in the high 2000's:
(serial # x serial #) + 42747 - 8388608 = (password #)
serial # = S/N of the radio[/b]
Cheers!
- Tue Sep 01, 2009 12:23 pm
- Forum: Vertex
- Topic: VXR-9000 to UHF Ham Band
- Replies: 7
- Views: 22604
Re: VXR-9000 to UHF Ham Band
Send me your email, I have the file ready to go 400.000 - 512.000!
Lorne VE1BXK
mailto:ve1bxk@ns.sympatico.ca
Lorne VE1BXK
mailto:ve1bxk@ns.sympatico.ca
- Thu Jan 01, 2009 11:52 pm
- Forum: Vertex
- Topic: FTl-1011H 99ch CE& software help
- Replies: 1
- Views: 4002
Re: FTl-1011H 99ch CE& software help
Yes I have done it, but in involves changing the VCO in the unit. I obtained them right from Vertex directly. You will have to of course align the receiver etc. I did it to a 4 channel FTL-1011H and worked fine. Part number CA0632001 (29.7 - 39 Mhz VCO ) 25 Khz spacing. It is very tricky removing th...
- Mon Jul 14, 2008 1:23 pm
- Forum: Vertex
- Topic: 99ch FTL-1011 on 10 meters?
- Replies: 7
- Views: 11435
Re: 99ch FTL-1011 on 10 meters?
Yes I have done it, but in involves changing the VCO in the unit. I obtained them right from Vertex directly. You will have to of course align the receiver etc. I did it to a 4 channel FTL-1011H and worked fine. Part number CA0632001 (29.7 - 39 Mhz VCO ) 25 Khz spacing. It is very tricky removing th...
- Mon May 15, 2006 1:59 pm
- Forum: Vertex
- Topic: FTL-1011 Convert B to A
- Replies: 0
- Views: 3323
FTL-1011 Convert B to A
I have FTL-1011 B version 36-50 Mhz and I want to change it to a
A Version (29.7-36 Mhz). Does anyone have the change specs for the VCO so I can change components and realign for the low split?
A Version (29.7-36 Mhz). Does anyone have the change specs for the VCO so I can change components and realign for the low split?
- Tue Feb 14, 2006 12:55 pm
- Forum: Vertex
- Topic: FTL-7011 squelch setting
- Replies: 4
- Views: 6069
- Wed Jan 25, 2006 8:38 pm
- Forum: Vertex
- Topic: FTL-1011 Low Band
- Replies: 2
- Views: 4498