The Radio Information Board

Well I was able to get my Kantronics KPC3+ last night hooked up and transmitting Data, I have to connect another radio tonight to listen but is seems to be working OK so far. Here is what I did 1 - Retuned the TK-630's VCO into the 6M band - (thanks to a ham in the US no call for the vco info) 2 - U...

Well a minor retune of the VCO and brings it right in line.

Will

Mod, thats what I though, .....the Power to the ground gave me 14.01 volts.

I will ahve to check things out a bit more.

thanks

Will

OK I build the radio end of the cable last night TX Audio to Radio Pin 5 Line Audio Input RX Audio to Radio Pin 4 Dectector Audio Out PTT to Radio Pin 8 RX Detect to Radio Pin 13 TNC Pos Power to Radio Pin 7 Switched voltage 1 AMP Max (TNC take 60mw) GND to Radio Pin 11 DC Ground Now a few questions...

Kck-5. Card interphase of DTMF and 2 tones with relay to activate the horn. (it does not include decoder). For Series 30 moving bodies well there is my answer in spanish only google translator. so if I cam going to mod the radio with the two jumpers for audio input to the tone pot as well as the COS...

OK folks, reasearching a bit more. the pin out sayas for th horn Alert that it can be moded for other functions, I found a tech note form pyramid that shows me how to extract data audio thanks to someone can't remember who that pointed me over to a voice mode for a repeater there. anyhow for pin 10 ...

Jeff, already a step ahead i e-mail sohail to bring it thursday........smiles....

mod, will do once I get one, the antenna ia a comet gp-15 and when checked on 2 and 70 via meter it flat as a p[ancake, on the analyzer it shows 6 flat as well form 51.3 to 54MHz

Will

SWR when I used the analyzer on the antenna is 1.1 to 1 very flat.

Ok just another observation after workign with the radio last night. if I have it plugged into my rigrunner once I key up it sets the rig runner into an undervoltage for a quick instant. and resets the other gear only a few amps on the rigrunner. powersupply is an alinco 330 and seems to handle the ...

Ok from what I can tell no speaker yet on this guy but the vco is not locking, and will have to adgust it up for the ham band ...... I thoght I saw once a tech not on how to adjust the 630 up a notch or two to get 50-54 coverd. Really all i;m looking for in it

thanks

Will

OK cool, thanks for the help.....

I'll check the board number on the vhf radios and see if it matches what you are saying.....for part number if it does I'll order a few cpu's and see what happens

Will

I'm refering to the board where the micro processor plugs into

I head that you can find the correct micro via the board number.....

perfect I have the uhf ones here and the part number is slightly off......I'll check the vhf ones later

thanks again

Will

ok cool thanks, just wondering if you could also let me knwo what the part number on the board is so I cna cross referance that to what I have in them and get some parts ordered.

thanks
Will