Search found 13 matches

by radio230
Thu Jun 23, 2011 4:50 pm
Forum: Harris Public Safety Communications (PSPC) Equipment
Topic: Orion Encoder Tones
Replies: 0
Views: 7329

Orion Encoder Tones

I am trying to find out how many diffrent sets of encoder tone you can program into an Orion. I am wanting to have 4 seperate encoder tone sets programmed into my departments dispatch radio. One would be for our department, the other 3 are for neighboring departments that use our frequency for dispa...
by radio230
Fri Sep 26, 2008 9:39 am
Forum: Harris Public Safety Communications (PSPC) Equipment
Topic: KPC-300 Programming Problem
Replies: 1
Views: 4010

KPC-300 Programming Problem

I am trying to program an Ericsson KPC-300, model# KRD 103 111/12 R2G. The issue is I am trying to program a frequency, 153.830, and it requires a PL/CG tone of 69.3. The programming manual states anythin between 67.0hz and 210.7hz is acceptable. However, when I enter the 69.3 PL is spits out "...
by radio230
Tue Oct 23, 2007 3:44 am
Forum: Harris Public Safety Communications (PSPC) Equipment
Topic: GE Comm. Handheld mobile mic
Replies: 3
Views: 6476

Re: GE Comm. Handheld mobile mic

I appreciate the info, but it leaves me even more confused. The mic I have has only 5 wires, you listed 8 active pins. The mic I have came off a GE Mastr II or Mastr III rack mount base transmitter. It is what we used at the PD from our Zetron console. I don't know if this informatin makes a diffren...
by radio230
Sat Oct 13, 2007 7:09 pm
Forum: Harris Public Safety Communications (PSPC) Equipment
Topic: GE Comm. Handheld mobile mic
Replies: 3
Views: 6476

GE Comm. Handheld mobile mic

Hopefully someone can help me. I am trying to find the pin-out for a GE mobile mic. It uses the RJ45 connector. What I am trying to do is make this work as an external mic for a Motorola CDM1250. I have the pin-out for the rear acc. post on the CDM1250 figured out (i think) but cannot locate the dia...
by radio230
Sun Mar 25, 2007 5:59 am
Forum: Harris Public Safety Communications (PSPC) Equipment
Topic: GE/Ericsson M-RK and Orion
Replies: 6
Views: 15481

Thanks for the info! I am actually looking to buy one of each and will need them to do a few narrowband channels. You, or anyone, would not by chance know what the correct combination number would be would you. I looked at the Hall Electronics page and it is a bit confusing to me. What I need for bo...
by radio230
Wed Mar 21, 2007 9:47 pm
Forum: Harris Public Safety Communications (PSPC) Equipment
Topic: GE/Ericsson M-RK and Orion
Replies: 6
Views: 15481

GE/Ericsson M-RK and Orion

Is there some kind of special relationship to the Orion mobile and the M-RK portable? I ask only because I looking to buy both of these radios, and in looking discovered they both use the same (old DOS)Programming software. I thought it strange that one program would work with a specific mobile and ...
by radio230
Mon Jan 22, 2007 5:05 am
Forum: Harris Public Safety Communications (PSPC) Equipment
Topic: GE / Ericsson KPC & M/A-Com Panther 500P
Replies: 2
Views: 5737

GE / Ericsson KPC & M/A-Com Panther 500P

Can anyone tell me if the GE Ericsson KPC-300 is the same radio as the M/A-Com Panther 500P. I know they use the same batteries, speaker mic, etc. Are there any diffrences between them or are the identical except for model name and slight case variations? Also, would a KPC charger and Pather 500P ch...
by radio230
Wed Jan 10, 2007 12:18 am
Forum: Harris Public Safety Communications (PSPC) Equipment
Topic: KPC-300/400 Programming question
Replies: 3
Views: 5773

Meatball, thanks for the info. I figured it was a section of the program that, if I had post here to ask about it, i shouldn't even look at! :lol: Anyway, I would like to learn more about the settings, before even thinking about messing with them. You mentioned a manual that covers it. Would you kno...
by radio230
Tue Jan 09, 2007 9:27 am
Forum: Harris Public Safety Communications (PSPC) Equipment
Topic: KPC-300/400 Programming question
Replies: 3
Views: 5773

KPC-300/400 Programming question

I am using the DOS programmer, version 4.0 The question I have is this, under the utilites menu there is "Maint" option. When I go into the maintenance screen a warning pops up basically saying you can f*** up your radio here. In here is tracking data (looks like tuning data?). Anyway, I a...
by radio230
Fri Jan 05, 2007 3:49 pm
Forum: Harris Public Safety Communications (PSPC) Equipment
Topic: M-PD Manual
Replies: 4
Views: 6632

Well, I am no expert, but I have seen older Fujitsu Ten radios of about the same era that did this in scan. It was caused by the priority scan. It would show semi-random channels when it stopped the normal scan to check the priority channel. I don't know if this is the same thing, but it's an idea.
by radio230
Thu Jan 04, 2007 9:07 am
Forum: Harris Public Safety Communications (PSPC) Equipment
Topic: M-PD Manual
Replies: 4
Views: 6632

Try looking at http://www.repeater-builder.com/ge/lbi-master-list.html . They have an extensive list of old GE / Ericsson manuals. I looked through there but only found the maintenec and ?service? manual for the M-PD w/ no reference to voiceguard. These PDF files are free for personal, non-profit, u...
by radio230
Tue Jan 02, 2007 10:29 pm
Forum: General Chatter
Topic: Donations...
Replies: 6
Views: 7801

Glad to help. The information availabe here is, to me, invaluable. Anything I can do to keep it going I will!!

And Alex, PM was sent
by radio230
Tue Jan 02, 2007 3:15 pm
Forum: Harris Public Safety Communications (PSPC) Equipment
Topic: KPC 300/400 options
Replies: 2
Views: 9426

KPC 300/400 options

Can anyone tell me what are all the available options in the GE / Ericsson KPC 300/400 VHF radios. I have 2 300s and 3 400s i am needing programmed. I have not been able to locate the owner's manual or the maintenence manuals for these radios so I have no idea what is availabe to me (other that 16 c...