I just got the sr6000 repeater kit for 215 shipped.
Thanks all
Search found 13 matches
- Sun Feb 22, 2004 1:48 pm
- Forum: General Chatter
- Topic: Board Activity
- Replies: 3
- Views: 5782
Board Activity
This does not seem to be a very avtive board in general. They are a lot of posts that go unanswered.
- Tue Feb 17, 2004 12:50 am
- Forum: Maxon
- Topic: Repeater SM6000
- Replies: 1
- Views: 4199
Repeater SM6000
Has any put together two sm6000 radios to make a repeater?
Question is! what connection wire is used bewteen the 9 pin plugs?
Are they just straight thru?
Is it a special cable?
Question is! what connection wire is used bewteen the 9 pin plugs?
Are they just straight thru?
Is it a special cable?
- Tue Jun 24, 2003 6:52 pm
- Forum: RELM/Regency/Wilson
- Topic: Need the Relm DRU Programming Cable Schematic
- Replies: 1
- Views: 4733
- Tue Jun 03, 2003 9:25 pm
- Forum: Maxon
- Topic: Repeater - help
- Replies: 9
- Views: 12211
n_zero_ndp I found this information and do not know if this will help. Pin 1 Audio in Pin 2 TX Tones Pin 3 Busy/Squelch Pin 4 Call Pin 5 Monitor Pin 6 PTT in Pin 7 RX Audio in Pin 8 Alert Tone Out Pin 9 Call LED Pin 10 Mic Control Pin 11 Audio Mute Pin 12 TX Enable Pin 13 Ground Pin 14 8V Pin 15 No ...
- Sat May 31, 2003 7:50 pm
- Forum: Maxon
- Topic: Repeater - help
- Replies: 9
- Views: 12211
Ok Ken This is what I have From the Zetron manual the wiring pin layout. 1 - 12 volt 2 – Ground 3 – Discriminator 4 – Ground 5 – TX Audio 6 – Not used 7 – PTT 8 – Ground 9 – COR 10- CTCSS The following are the instructions. 1 – Connect the power supply positive supply lead to pin 1, connect power su...
- Sat May 31, 2003 12:38 pm
- Forum: Maxon
- Topic: Repeater - help
- Replies: 9
- Views: 12211
- Fri May 30, 2003 8:08 pm
- Forum: Maxon
- Topic: Repeater - help
- Replies: 9
- Views: 12211
Repeater - help
Has anyone built a repeater from two maxon sm4450 mobiles and a zetron repeaterman model 37 controller?
- Thu May 15, 2003 6:00 pm
- Forum: Maxon
- Topic: DTMF Programming
- Replies: 2
- Views: 5308
- Tue May 13, 2003 8:12 pm
- Forum: Maxon
- Topic: DTMF Programming
- Replies: 2
- Views: 5308
DTMF Programming
I need to program a device using a DTMF radio. All I have is Maxon. Can I buy a DTMF mike and use it with my Maxon radio to program the device?
Do I make any sense?
The device said it can be programmed remotely by a DTMF radio.
HELP
Do I make any sense?
The device said it can be programmed remotely by a DTMF radio.
HELP
- Mon Mar 24, 2003 10:18 pm
- Forum: Maxon
- Topic: Maxon wiring
- Replies: 6
- Views: 9457
- Sun Mar 23, 2003 12:25 am
- Forum: Maxon
- Topic: Maxon wiring
- Replies: 6
- Views: 9457
- Fri Mar 21, 2003 7:41 pm
- Forum: Maxon
- Topic: Maxon wiring
- Replies: 6
- Views: 9457
Maxon wiring
Does anyone have the wiring diagram for the sm2450 or sm4450 mike?