Search found 83 matches

by Two way repair man
Sun Jun 14, 2009 12:15 am
Forum: RELM/Regency/Wilson
Topic: Regency RSP 500
Replies: 1
Views: 8099

Re: Regency RSP 500

AZ, To program the RSP you will need to find a working RELM PM45A(older) or PM4500(newer) hand held programmer. These were sold by the factory to dealers only. Owner's manuals are going to be difficult to locate as well. I have a programmer but still use it for making customer repairs. I can program...
by Two way repair man
Sun Jun 14, 2009 12:08 am
Forum: RELM/Regency/Wilson
Topic: RMV60B no transmitt
Replies: 1
Views: 7287

Re: RMV60B no transmitt

Redbird,

It seems as though I answered this one offline somewhere. Did you check the programming and VCO volts?

Bill
by Two way repair man
Mon May 04, 2009 7:01 pm
Forum: RELM/Regency/Wilson
Topic: Need mic pinout for Relm SM series
Replies: 2
Views: 8815

Re: Need mic pinout for Relm SM series

The microphone pin outs for the older SM-series mobiles are as follows: Pin 1 = RX earpiece audio (not connected) Pin 2 = Ground Pin 3 = PTT (+5vdc in RX, 0vdc in TX) Pin 4 = Microphone Audio (low impedance) Pin 5 = Hang up (+5vdc off hook, 0vdc on hook) Pin 6 = Switched +13vdc (Not connected) I hop...
by Two way repair man
Mon Mar 30, 2009 10:38 pm
Forum: RELM/Regency/Wilson
Topic: RELM, Regency, Wilson two-way repairs
Replies: 3
Views: 11884

Re: RELM, Regency, Wilson two-way repairs

If it is a WHS-1 I can help you with everything except the battery pack. I still have a few radios laying around. Does need repair or are you looking for parts?

Regards,

Bill
by Two way repair man
Mon Mar 23, 2009 8:03 pm
Forum: RELM/Regency/Wilson
Topic: RELM, Regency, Wilson two-way repairs
Replies: 3
Views: 11884

RELM, Regency, Wilson two-way repairs

To help combat the recession I have lowered my labor rate to $29 per radio, plus parts, and shipping. My cost on parts and shipping is your cost. The models that I can repair include: Regency: LMU15, LMV25B, RH250B, RFH252B, RH256B, RH600, RH606B, RU150, RU156, XL2000 A.K.A. XLH250B (All can be modi...
by Two way repair man
Fri Mar 06, 2009 11:06 pm
Forum: RELM/Regency/Wilson
Topic: vhf regency help
Replies: 16
Views: 35509

Re: vhf regency help

Fireman5, The Regency RFH252B can only be programmed two ways. The easiest is using the Regency RFP hand held programmer. It has a multicolor ribbon cable and a gray ribbon cable with a red stripe down one side. It plugs into the inside of the radio. You might get lucky and find one on Ebay. The oth...
by Two way repair man
Thu Jan 08, 2009 8:31 pm
Forum: RELM/Regency/Wilson
Topic: Relm SMWHS microphone
Replies: 1
Views: 5435

Re: Relm SMWHS microphone

Check with Lenny Gunsch at Two Way Communications in Las Vegas. He might have some used microphone parts. Contact him via email: lgunsch@hotmail.com
by Two way repair man
Wed Dec 24, 2008 12:02 am
Forum: RELM/Regency/Wilson
Topic: Relm-Uniden SMU250KTS scan
Replies: 3
Views: 10657

Re: Relm-Uniden SMU250KTS scan

Redbird, I do not have a copy of the Uniden programming software so I am going on a vague memory. I believe you have to add channels to the scan list using the software. It might be in one of the options. If that does not help I can give you the email address of the Uniden product guru Dennis Duffie...
by Two way repair man
Fri Nov 21, 2008 9:10 pm
Forum: RELM/Regency/Wilson
Topic: Regency and RELM two ways for sale
Replies: 0
Views: 6086

Regency and RELM two ways for sale

I have the following used two-way radios for sale: RELM Portables: Qty = 1 MPU32 (450MHz to 482MHz, 4w/1w, 32 channels, keypad programmable, most of the common CTCSS tones - does not have DCS) Missing charger and battery. Comes with antenna, radio, and belt clip. Price $25 plus shipping Qty = 1 WHS1...
by Two way repair man
Mon Nov 03, 2008 9:30 pm
Forum: Bendix King Radio
Topic: Bendix King Batteries
Replies: 6
Views: 14604

Re: Bendix King Batteries

Jim, Are the batteries and the chargers new? What is the approximate average temperature in your barn? If it is at or below 32 degrees F there is a good chance that the battery and charger contacts have contracted so they make poor or no contact. Try bringing a charger and battery in the house to se...
by Two way repair man
Sun Oct 26, 2008 12:41 pm
Forum: Bendix King Radio
Topic: Bendix King Batteries
Replies: 6
Views: 14604

Re: Bendix King Batteries

For nearly 25 years I worked at the Regency/RELM and then the RELM/BK factory. I spent 18 of those years in the Customer Service department working on new and field returned radios and accessories. Also, I spent a great deal of time on the phone providing technical support to users, dealers, and sal...
by Two way repair man
Tue Oct 21, 2008 7:50 pm
Forum: RELM/Regency/Wilson
Topic: Regency Micro-Com L61C
Replies: 4
Views: 8838

Re: Regency Micro-Com L61C

Steve, Good luck on the BTL. The low pass filter is not as sharp but the radio will become very spurious if it is not tuned carefully. If you see 20 to 30 watts and only 3 to 4 amps then it is not tuned correctly. The current should be pulling between 5 and 6 amps at full power. There is a method to...
by Two way repair man
Tue Oct 21, 2008 7:35 pm
Forum: RELM/Regency/Wilson
Topic: Wilson Citi-Com II WS201
Replies: 1
Views: 5242

Re: Wilson Citi-Com II WS201

Glen, The Wilson WS201 will not tuned to 902MHz without several modifications. You will need a service manual and I am not sure if all the parts are still available, especially the correct RF amp final in the PA. I have not serviced any crystal units in more than 10 years so my crystal manuals have ...
by Two way repair man
Tue Oct 21, 2008 7:13 pm
Forum: RELM/Regency/Wilson
Topic: Regency H256B Programming
Replies: 10
Views: 19278

Re: Regency H256B Programming

Nick, If you go to my web site at the linked listed below you will find a small list of modifications that will allow the radio to be tuned down to 144MHz. The radio will need the VCO coil retuned to operate in the new frequency range. Both the receiver and transmitter will require realignment in or...
by Two way repair man
Sat Oct 18, 2008 11:00 am
Forum: RELM/Regency/Wilson
Topic: Regency Micro-Com L61C
Replies: 4
Views: 8838

Re: Regency Micro-Com L61C

The Regency MCL61C is only rated to operate to 50MHz. Transmit power is 60 watts with a maximum current of 15 amps at 13.6vdc. You will need crystals that meet the Regency requirements, including the burn in or aging to reduce frequency drift. The last time I checked a good quality cut of crystals w...