The Radio Information Board

[read the rules!]

The problems may occur if you try to use 5-tone-capable radios software with a DTMF-capable radio and vice versa. The proper software must work if there is no hardware malfunction. Try to set "Feature option\cloNe" to [Enable ]. If it doesn't help, report the emerging message when you try ...

It is the right cable. KPG-22 is powered from the COM port. Only KPG-8 needs the external power source. The cable must be seated well. And run the program under DOS.

There must be no problems in programming the radio. You should use KPG-22 or KPG-8 (with an external power source) programming cable. Run the program in the real DOS mode, not under Windows. At first read the radio, save to disk, then modify the data.

The best way to solve your problem is to record that guy's sayings, find his location and punish according to the law. There is something else you can do right now. 1. Leave the repeater transmit frequency unchanged (it's easy to find), change the repeater receive frequency by any odd step not equal...

Use 4-contact 3.5 mm jack from this pic (YAESU/VERTEX):

Explore this page:
http://kominform.by.ru/pr_eng_s.html
It is tested.

Try this one:


Do not confuse TxD and RxD cirquits. They are confused in the previous post for mobile jack.

The radio has no display, how could you find out which channel is active during scanning? No scanning is available. Sorry.

I worked with TK-360G. It's the same but for UHF. Very good radio with many useful features like DTMF.

The display lamp on a Kenwood TK760H (not TK760GH) may die because of the Q405 current regulator malfunction. The Q405 (2SB1132) transistor may be dead. It may be no contact in R455 10 Ohm resistor, it is easy to find, it hangs on its long legs. I had this problem because of the bad resistor.