Search found 11 matches

by Uncle Zhenya
Wed Oct 20, 2004 1:50 am
Forum: Kenwood Commercial Products
Topic: programming tk278
Replies: 22
Views: 36821

[read the rules!]
by Uncle Zhenya
Mon Jul 19, 2004 5:10 am
Forum: Kenwood Commercial Products
Topic: Kenwood TK-350 Programming Problem
Replies: 7
Views: 9711

The problems may occur if you try to use 5-tone-capable radios software with a DTMF-capable radio and vice versa. The proper software must work if there is no hardware malfunction. Try to set "Feature option\cloNe" to [Enable ]. If it doesn't help, report the emerging message when you try ...
by Uncle Zhenya
Mon Jul 19, 2004 2:31 am
Forum: Kenwood Commercial Products
Topic: Kenwood TK-350 Programming Problem
Replies: 7
Views: 9711

It is the right cable. KPG-22 is powered from the COM port. Only KPG-8 needs the external power source. The cable must be seated well. And run the program under DOS.
by Uncle Zhenya
Mon Jul 19, 2004 2:05 am
Forum: Kenwood Commercial Products
Topic: Kenwood TK-350 Programming Problem
Replies: 7
Views: 9711

There must be no problems in programming the radio. You should use KPG-22 or KPG-8 (with an external power source) programming cable. Run the program in the real DOS mode, not under Windows. At first read the radio, save to disk, then modify the data.
by Uncle Zhenya
Mon Jul 12, 2004 2:02 am
Forum: General Chatter
Topic: Securing a repeater
Replies: 10
Views: 14523

The best way to solve your problem is to record that guy's sayings, find his location and punish according to the law. There is something else you can do right now. 1. Leave the repeater transmit frequency unchanged (it's easy to find), change the repeater receive frequency by any odd step not equal...
by Uncle Zhenya
Tue Jul 06, 2004 9:18 am
Forum: Vertex
Topic: VX-10 Pinouts...
Replies: 3
Views: 5893

Use 4-contact 3.5 mm jack from this pic (YAESU/VERTEX):
Image
Image
by Uncle Zhenya
Mon Jul 05, 2004 3:13 am
Forum: Vertex
Topic: VX-10 Pinouts...
Replies: 3
Views: 5893

Explore this page:
http://kominform.by.ru/pr_eng_s.html
It is tested.
by Uncle Zhenya
Mon Jul 05, 2004 3:09 am
Forum: Kenwood Commercial Products
Topic: Tk 730 cable?
Replies: 3
Views: 4904

Try this one:
Image
Image
Do not confuse TxD and RxD cirquits. They are confused in the previous post for mobile jack.
by Uncle Zhenya
Wed Jun 30, 2004 8:05 am
Forum: Kenwood Commercial Products
Topic: KENWOOD TK-260G-1
Replies: 3
Views: 4858

The radio has no display, how could you find out which channel is active during scanning? No scanning is available. Sorry.
by Uncle Zhenya
Wed Jun 30, 2004 2:59 am
Forum: Kenwood Commercial Products
Topic: KENWOOD TK-260G-1
Replies: 3
Views: 4858

I worked with TK-360G. It's the same but for UHF. Very good radio with many useful features like DTMF.
by Uncle Zhenya
Tue Jun 22, 2004 2:32 am
Forum: Kenwood Commercial Products
Topic: Repair Display Lamp on Kenwood TK760H
Replies: 2
Views: 4209

The display lamp on a Kenwood TK760H (not TK760GH) may die because of the Q405 current regulator malfunction. The Q405 (2SB1132) transistor may be dead. It may be no contact in R455 10 Ohm resistor, it is easy to find, it hangs on its long legs. I had this problem because of the bad resistor.