The Radio Information Board

Hello. I was wondering what the firmware upgrade for the TK 480 called "MPSPAC" was for? I'm attempting to place a TK480 into a JPS ACU-T for use with the national I TAC freqs and cannot get the radio to program these simplex freqs.......821.125///821.5125///822,125 and so on and so on.. T...

I just did a search on this website of this problem and found lots of info.I will be going out there today and do some first hand checking.
Thanks for the reply

Hello To All, I have local Red Cross office that called me with question concerning interference to a newly installed low band mobil in a desktop configuration. They say that of the 10 freqs that are programmed into the radio the problem is only occurring on ch 1 and no others. The freqs are all sim...

Hi.. I'm programming a vhf 70-1442b with the 70-1080 midland programmer and having trouble with only one part.. the ctcss portion that the programmer displays between the rx and tx screens only shows that it is ctcss and does not tell what tone in programmed in this position. Is there a way to get t...

Hi to all... I am trying to connect a tk 730 and tk 830 together as a dualband setup and something is not working..kpg7d ,kch4 head,160 ch upgrade in both radios.both radios checked for proper operation prior to krk4db dualband kit installation. problem #1 no instructions for krk4db kit,problem#2 wh...

yes i have one that you can have...where do i send it?

Looking for KRK 4DB SETUP SO I CAN CONNECT TK830 AND TK 730 INTO DUALBAND SETUP.. THANKS FOR LOOKING.......

Wanted...power cord for high power tk 730h mobil. Also need the small chrome disks that mount on side of remote mount mobil deck so deck is secure in remote mount bracket. I have the latches and locks...

Thanks Del

where is the best place to obtain the software for a 70-1442 B mobil radio?

try holding down the squelch button while powering up the radio

I have had a go round with this before and found that using the aftermarket cable that the pins in the mic jack of the radio had lifted up and become unaligned in the slots provided. remove your mic,get a good light, and ck for proper alignment of spring contacts in mic jack socket..