The Radio Information Board

I could not programming my VMDE-200. My CE-39 Ver 1.21 My CE-73 Ver 1.01W My Cimarron [ANI Prog] Ver 1.03 My VX900 Firmware Ver 1.53 I use the programming cable and install the VMDE-200 into my VX-900, I press [PTT+Orange Button then switch on the Radio] and the LCD display display Sub Clone. After ...

Thanks your quick response. Do you meant that Vertex has DOS version programing software ? just same as big "M" can do programing without hacking ? If it can do, do I need to do some adjustment for the OSC. for I can TX/RX with in HAM Band (437Mhz) ? There is a local dealer in my country b...

I bought a VX-900 UHF AS1 model (400Mhz - 430Mhz)and tried to program below 400Mhz and up to 438Mhz. I can tell the radio cannot program below 400Mhz and cannot program up to 435Mhz. If you program 399Mhz, the programing software [CE-39]will correct it back to 400Mhz. If you program 431Mhz to 433Mhz...

Hi, I use VX-900 VHF and I equipped the Midian MDC Board in it. I would like to tell that my Astro Saber 3 can display the VX-900 ID. If you want your Vertex can send and receive (decode) the ID, I suggest there is another MDC Board you can use. Please go to visit Midian and Cimarron Web Site : http...

Hi Radio259,
Many thanks your information and hope have your latest information sooner or later about the VX-900 UHF issue.
STD

Normally, I only need the 430Mhz to 437Mhz for HAM BAND use. The model that I am going to buy is VX-900 UHF AS1 model and the spec shown the frequency cover range is 403Mhz to 430Mhz only. Thus, if it can program more 7 Mhz (to 437mhz) it is enough for me. Due to in my country the UHF HAM Band is be...

Hi Muggsy09, Many thanks your value information. Now my probelm is I could not find out a answer that the Vertex VX-900 USA1 (403Mhz-430Mhz) model can be programmed up to 437Mhz or 440Mhz. It is because I would like to use HAM band with this handheld. I have the CE39 RSS and also owned CE39 Forest R...

Thanks your value information. If the Vertex VX-900UHF (400Mhz-430Mhz) model can program to 437Mhz is enough for me due to I use in HAM Band. If you can find the Dos Software please let me know. By the way, I saw there is 2 AD on EBAY about the DOS Version but the seller told me that Program Softwar...

Hello Paul, Many thanks your value information. I only have CE39 Windows programming Software, could you tell me where I can buy the Dos Ver. ? According you information, the VX-900 cannot program to 440Mhz am I right ? I have experience program the Astro Saber in DOS. so do you meant I need to do h...

I am going to buy a Vertex VX-900 UHF (400 Mhz to 430Mhz) soon. I would like to also program the HAM Band into this radio (from 430Mhz to 440Mhz). I ask someone and he told me Vertex cannot program the frequency which higher than they factory setting. I donot know it is true or not. My request : If ...

I am going to buy a Vertex F5D-14 (5 Tone En/Decoder unit) for my VX-900.
I heard this board function is same as Motorola MODAT the leading ID Code, is it true ?
Does it meant if I set the ID in my Motorola Radio in MODAT, only my VX-900 can communicate with ? (like DCS & PL Code)
STD

Hi, I own one VX-900 VHF and program to 144-148 HAM Band.
Yes, it does but the sound in receive side like big M Saber (not Astro Saber).
You can progrom Lead PTT ID or End PTT ID.
The side tone from your VX900 which you heard is like "BEE", personally I fell not like Astro Saber so COOL.
STD

I have a Vertex VX-900 and Big M Astro Saber 3 VHF. I use the simplex channel to communicate with my friend and they told me the MDC1200 between VX-900 and Astro Saber 3 PTT ID sound is total different that they heard in their radio and I also found out use my Scanner and they are right Does anyone ...

Dear all, I have some problems about my VX-900V. I bought a new VX-900V with CE39 S/W and the programing cable. I remember the VX-900 catalogue said the users can programing total 512 channels. When I use the software CE39 Ver.2.05 to do I found out I can not append [Group 2; Group 3 etc.] does any ...

Dear all Vertex users, I would like to buy a Vertex VX-900A (VHF and UHF) for replace my BIG M HT. I use HAM BAND no matter in VHF or UHF, I tried to contact my local dealer but they seems no interest my inquiry and no reply me. :evil: I am a HAM and living in Hong Kong and I would like to ask does ...