Search found 11 matches

by motogayzer
Wed Nov 29, 2006 12:27 am
Forum: Maxon
Topic: does anyone have a schematic for a program cable for a....
Replies: 0
Views: 2653

does anyone have a schematic for a program cable for a....

sp340 maxon portable and what frequencies can i program into it ? 400-512 mhz ?
delta " s " on uhf
by motogayzer
Thu Aug 24, 2006 10:27 pm
Forum: Icom Commercial Radios
Topic: icom u16 reset ?
Replies: 0
Views: 1037

icom u16 reset ?

i have a radio icom U 16 thats acting weird ...how do i reset the cpu? it reads 508.xxx on every channel and when i try to change it , it wont accept the new frequency...........it accepts the new ctcss tone but not frequency....
by motogayzer
Fri Mar 31, 2006 2:00 am
Forum: Kenwood Commercial Products
Topic: tk805d... need microphone connections / wiring......
Replies: 5
Views: 1932

thank you for your knowledge and response

:D thank you again for your time also scott
by motogayzer
Thu Mar 30, 2006 11:25 pm
Forum: Kenwood Commercial Products
Topic: tk805d... need microphone connections / wiring......
Replies: 5
Views: 1932

will the 12 volt pin voltage hurt a mike using a 8 vdc .....

input ? or what value would you think would be good to get down to 8 volts to feed near correct voltage ...? the microphone i plan to use is a johnson 16 tone dtmf type (pn#589-7600-022) nice new mike , has a 8 pin on now - but wont for long...... also will need to wire another johnson mike to the s...
by motogayzer
Sun Mar 26, 2006 3:13 am
Forum: Kenwood Commercial Products
Topic: tk805d... need microphone connections / wiring......
Replies: 5
Views: 1932

tk805d... need microphone connections / wiring......

i have another company dtmf microphone and want to wire it to the tk805d radio , does someone out there have the pinouts and what is designated for each pin of the 6 pin rj45 modular connector ? Please send .....
by motogayzer
Sun Mar 26, 2006 3:07 am
Forum: Yaesu
Topic: trying to program the ftl-7011 need ..........
Replies: 1
Views: 2948

trying to program the ftl-7011 need ..........

i have the vpl-1 cable but only have a 4 conductor speaker male plug--- jumper cable to a stereo (3 conductor female) connector-- need to wire the modular (rj45 type)connector -to-stereo type connector...anyone out there help ?
by motogayzer
Fri Jan 20, 2006 12:49 am
Forum: Kenwood Commercial Products
Topic: how do i program a kenwood tk-230 ?
Replies: 7
Views: 4018

Re: 230

yes please send what you can i have 2 vhf tk230 radio's slowly turning into shelf orniments....i have the connector from a speaker/mike already ....scott I can send you some schematics for a programming cable I built if you want to try building it. You will need a mic connector and a few other inexp...
by motogayzer
Mon Jan 16, 2006 2:12 pm
Forum: Kenwood Commercial Products
Topic: how do i program a kenwood tk-230 ?
Replies: 7
Views: 4018

keypad on radio but......

it doesnt do anything after i get the writer on display..shorted pins 3,4 and 6 to get writer remove short and pressing the buttons does nothing plus the writting on the keypad is worn off....when turning on radio without program mode it enters the numbers as a keypad would but scan not working ..if...
by motogayzer
Sun Jan 15, 2006 11:32 pm
Forum: RELM/Regency/Wilson
Topic: regency rh256b
Replies: 15
Views: 11640

the portables on your web page...

will they program on the ham band ? and can you field program the portables ? Is there a low band version for the portables that will program to 29.5 mhz up to 29.7 mhz and is there one to go to or from 46-54 mhz ? is there field programming for them ? Bill, I guess we are in the backwoods here. I'v...
by motogayzer
Sun Jan 15, 2006 11:00 pm
Forum: Maxon
Topic: i need to program a MAXON SP340
Replies: 0
Views: 1326

i need to program a MAXON SP340

i have a uhf 16 channel on some gmrs channel that doesn't work where i am...would like it to go to the ham band 440-450 mhz..... if not there will it go to the " T " band on 470-490 mhz area ? the gmrs channels around here are dead and not worth an $80 license or to put up a repeater to chat with my...
by motogayzer
Sun Jan 15, 2006 10:43 pm
Forum: Kenwood Commercial Products
Topic: how do i program a kenwood tk-230 ?
Replies: 7
Views: 4018

how do i program a kenwood tk-230 ?

I have a tk230 10 channel vhf and the same with a dtmf keypad on the front...Is the cable an easy build or is there an adapter from other programmers i could use? i have a johnson 8600 programmer and a vpl-1 cable for a vx400 / vx10 vertex..and a polaris pa2 ...anyone help me please gotta make use o...