Search found 83 matches
- Sat May 24, 2008 10:34 pm
- Forum: General Chatter
- Topic: 2003 Passat RFI problem
- Replies: 2
- Views: 6577
Re: 2003 Passat RFI problem
Here is what I learned several years ago. According to a GM Service Bulletin: 1. Braid or twist the power and ground leads the full length of the cord. 2. The power cord should be routed from the location of the radio directly to the battery. 3. Make sure that the power cord and the antenna coax are...
- Fri May 09, 2008 2:54 pm
- Forum: RELM/Regency/Wilson
- Topic: Regency PROGRAMMER identification?? It's for sale too.
- Replies: 1
- Views: 5454
Re: Regency PROGRAMMER identification?? It's for sale too.
You have an RFP hand held programmer. It programs the Regency RBH252, RFH252B, RFU152, and the RELM RFH252N and RFH252NB. They are two channel mobiles. It will not work on any other models.
Regards,
Bill
Regards,
Bill
- Sun Feb 03, 2008 11:50 pm
- Forum: Bendix King Radio
- Topic: LPH-5141 Instructions
- Replies: 3
- Views: 10998
Re: LPH-5141 Instructions
If you want to go into the ham band and your LPH is not currently set up to do it you will need to change some hex codes. These hex codes can only be changed using a programming cable, an older PC running Windows 95 or 98 with the ability to shut down and go into the pure MSDOS mode, and the LPH pro...
- Tue Nov 13, 2007 10:47 pm
- Forum: Bendix King Radio
- Topic: GPH problems
- Replies: 2
- Views: 9141
Re: GPH problems
In case you are still waiting for a reply here is what I suspect. There is a scan switch at the top of the radio, usually the one closest to the antenna and yellow LED. If flipping it does nothing, check the programming of this switch. Make sure that one of the switches is designated as the Scan swi...
- Tue Oct 23, 2007 10:38 pm
- Forum: General Chatter
- Topic: Uniden Radio
- Replies: 1
- Views: 4602
Re: Uniden Radio
The Uniden SMH250 is a VHF 25 watt mobile. It requires a programming interface and computer capable of running in the true MSDOS mode (Windows 95 era). I would recommend that you contact the Uniden Guru, Dennis Duffield, if you need more information. He has 25 plus years experience with the Uniden p...
- Thu Aug 02, 2007 7:59 pm
- Forum: RELM/Regency/Wilson
- Topic: RELM MPV32 radios for sale
- Replies: 0
- Views: 4077
RELM MPV32 radios for sale
I have several MPV32 portable radios for sale that can be used for parts or repaired. Repairs are probably the common ones like : Bad PTT and Func switches, or bad LCD, or bad positive battery connector, etc. If you are interested get details by going to: http://billscommsol.com/feedback.htm Regards...
- Thu Jun 07, 2007 8:02 pm
- Forum: RELM/Regency/Wilson
- Topic: CHANNEL DISPLAYS FOR REGENCY RH256B
- Replies: 1
- Views: 4182
Re: CHANNEL DISPLAYS FOR REGENCY RH256B
Please contact me off line if you still need a display. I have a few in stock.
Regards,
Bill
Regards,
Bill
- Sat Feb 17, 2007 2:42 pm
- Forum: General Chatter
- Topic: So how do I do this ?
- Replies: 5
- Views: 7907
Re: I think I am over engineering things
Now we are getting to the details that matter. Forget the Basic microprocessor board because it is out of your price range once you add up everything else. Your idea to utilize the CWIDer for keying the radio would be the most simple to use. The sensors would have to trip a relay or FET transistor t...
- Fri Feb 16, 2007 9:37 pm
- Forum: General Chatter
- Topic: So how do I do this ?
- Replies: 5
- Views: 7907
Re: So how do I do this ?
You are asking to for a lot to happen at a low cost. Are you wanting someone to develop this gadget for you or are you going to do all of the research and development? There are low power data transceivers that might do the trick but I do not know of any cheap throw together systems for what you wan...
- Wed Feb 14, 2007 9:20 pm
- Forum: RELM/Regency/Wilson
- Topic: RELM, Regency, Wilson parts
- Replies: 0
- Views: 4515
RELM, Regency, Wilson parts
I have the following parts for sale: RELM RH256N or RH256NB keypads Qty = 5 @ $12 each plus shipping RELM SMV4016, SMV4099, SMU2599 display Qty = 2 @ $20 each plus shipping - both already mounted to PC board, and both displays are new. RELM RMU45NB, RMV60B, RML60B display board Qty = 1 @ $25 plus sh...
- Tue Jan 02, 2007 8:30 pm
- Forum: Kenwood Commercial Products
- Topic: TK840 for sale, would like to buy TK481 LTR
- Replies: 1
- Views: 2792
TK840 for sale, would like to buy TK481 LTR
We have the following Kenwood products for sale: Qty 10, TK840. They are used with mics and mount brackets good condition some with mounting bracket $95.00 each. ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ We are looking for the following Kenwood products: Qty 30 TK 481 LT...
- Sun Oct 15, 2006 7:36 pm
- Forum: RELM/Regency/Wilson
- Topic: Regency/Relm RSP500 batteries
- Replies: 2
- Views: 5584
Regency/RELM RSP500, 500B, 400 battery packs
The only person that I know that has any new/never used batteries is Michael Rink. At last conversation he had 80 or so but I do not remember what he was asking for them. The only contact information I have on him is phone number 828-322-5813.
I hope this helps.
Regards,
Bill
I hope this helps.
Regards,
Bill
- Sat Sep 09, 2006 4:34 pm
- Forum: RELM/Regency/Wilson
- Topic: Uniden power cable
- Replies: 2
- Views: 5339
Uniden power cord
Check with Dennis Duffield, RELM's Uniden expert. Even if RELM does not have a power cord he can refer you to someone that will. Dennis used to be the Uniden technical advisor of the two-way products.
Email: dduffield@relm.com
Bill
Email: dduffield@relm.com
Bill
- Mon Jul 03, 2006 8:10 pm
- Forum: RELM/Regency/Wilson
- Topic: Wilson model wh2507s
- Replies: 1
- Views: 5000
WH2507
The Wilson WH2507S is specifically designed to operate on the VHF RCC frequencies of the early 1980s, before the first cell phone. Without major reconfigurations (replacement of the EPROM, microprocessor, keypad - no longer available, and several component changes to the main board and VCO/audio fil...
- Tue May 02, 2006 10:16 pm
- Forum: General Chatter
- Topic: Ceramic Detector ?
- Replies: 5
- Views: 7728
Ceramic resonator failures
I have seen ceramic resonator fail because of vibration (in a vehicle) or shock (the radio got dropped) or corrosion. There is a ceramic detector but I have not found a web site stating that they are in use in two way communications. (Flat Ceramic Detectors (FCD) Technology. #1086. Flat Ceramic Dete...