The Radio Information Board

Hi all, has anyone ever put a Kenwood tk-190 on 10 meters and if so what "test frequencies" did you use?. I have one on ten except I could use more sensitivity. thank you. Davie n.3.c.h.u.@ atlanticbb dot net

Hi all, Do the VX3000 lowband radios only come in the four channel version and if not does the same lowband software work for the higher channel radios?. thank you all very much for your help. Davie n.3.c.h.u.at atlanticbb dot net

Hi all, Working with CE7 and need to know what the steps are to save a code plug to a floppy ? I can do the older stuff to a floppy but this has me stumped. any help appreciated. thank you. Davie n-3-c-h-u at atlanticbb dot net

Hi all, has anyone ever conquered CE7 for 29.6 yet??..Thanks. Davie n.3.c.h.u.at atlanticbb dot net

Hi, need help clearing an ERROR_2 and blinking red LED on the vertex vx-800UHF. I can program and read it but no audio .. am using a pure Dos system and version 1.14 (USA) 486/120. Any help would be very much appreciated thank you. Davie n-3-c-h-u- at atlanticbb dot net

Hi all, does anyone here know how to get into the factory mode in CE99 to be able to do 440 Ham band??Thank you . Davie n-3-c-h-u-at atlanticbb dot net

Make that VX-500 OR 510 thanks

Hi all, I'm looking for a couple of used VX500 HTs in good working order for Ham use. One on the 29.7 split and one on the 50mhz split for Ham use. If you have any in good shape please email me a N-3-C-H-U at atlanticbb dot net thanks . Davie N3CHU

Hi all, can someone please give me a explaination on how to HEX the CE7 lowband software? I am not asking for the software and am not new to hexing, have done some Mot. and Mid. and Kenwood. I Just need to know the steps involved with the CE7? I know this has been covered before but need more detail...

I tried what you suggested and it wont take the blank codplug or read, it goes from error_1 with blinking red led to error4 so it sounds expensive and I have a well used vx-210AU that works well. I really appreciate you taking the time to answer my questions, thank you very much. Davie somtimes win ...

Thank you for the reply, didnt pay too much for it but it did come with a nice speaker/ mic and two chargers and programmi ng cable. So guess you are saying it probably would cost more than its worth to have fixed? Davie

Hi all, would like to put my Kenwood TK-190 on 10M and its a K1. I know about the K2 6-10M conversion but was wondering if anyone has put one of these just on 10M with good results? If so what did you you use for "Test settings" also "sensitivity" settings? thank you and any help...

Hi all, is there a fix for clearing an error_1 with flashing red LED on a vx800 UHFwithout sending it to the shop? bought it cheaply at a Hamfest and would like to try fixing it myself if possible. using the cheap program cable but it worked for entering freqs etc but acted funny and now the error. ...

Hi all, has anyone here put a TK-390 on 440 band and what did you use Windows or Dos?..Am having trouble entering my "test freq" into the "test Mode" because when I enter the freq into the little [ ] box and hit enter and "F10" to move the sensitivity down th 445 it rev...

Thank you for your reply, I sort of figured that and I will take a crack at it as I like a challange. I didnt pay very much for it but it DOES transmit and recieve, but dont think I would go out and buy a programmer for it just for 10 channels(I think thats all it does) never have seen one of these ...