Search found 46 matches

by Glen W Christen
Thu Mar 04, 2004 4:44 pm
Forum: Harris Public Safety Communications (PSPC) Equipment
Topic: M-RK upgrade
Replies: 3
Views: 4022

MRK upgrade

It is POSSIBLE. 1) The front covers are interchangeable 2) In Maintenence you have to tell the radio what version it is 3) The proper operating code must be loaded - whether it works or not depends on what is in the present radio.
by Glen W Christen
Thu Mar 04, 2004 4:36 pm
Forum: Harris Public Safety Communications (PSPC) Equipment
Topic: Orion head question
Replies: 3
Views: 4180

Orion heads

The only difference is the System or Scan head. More/fewer buttons.
by Glen W Christen
Wed Feb 25, 2004 1:17 pm
Forum: Harris Public Safety Communications (PSPC) Equipment
Topic: Need Orion keypad buttons
Replies: 1
Views: 2405

Orion cap kit

p/n MAHG-MK3F M/A Com list $65.
by Glen W Christen
Wed Feb 25, 2004 1:14 pm
Forum: Harris Public Safety Communications (PSPC) Equipment
Topic: puting the LPE-200 into program mode
Replies: 1
Views: 2928

LPE 200 Program mode

Your listing was a little confusing.

1) Press Ptt and both side buttons simulanteously

2) Turn on power

3) display shows no characters - all LCD segments are turned on for a window-screen appearance

4) connect programming cable and program
by Glen W Christen
Wed Feb 25, 2004 1:09 pm
Forum: Harris Public Safety Communications (PSPC) Equipment
Topic: MVS out of band?
Replies: 1
Views: 2859

MVS

Yes. Enter frequency, then use 'control E'
by Glen W Christen
Thu Feb 05, 2004 6:15 pm
Forum: Harris Public Safety Communications (PSPC) Equipment
Topic: Provoice programming in the Orion Mobile
Replies: 1
Views: 2818

Orion

Not sure what you've got. That combination is NOT listed in the Orion service manual. What model/freq range do you have?
by Glen W Christen
Wed Jan 14, 2004 6:34 pm
Forum: Harris Public Safety Communications (PSPC) Equipment
Topic: Orion Auxiliary Output
Replies: 1
Views: 2779

Orion outputs

The programmable outputs are the collector of a a transistor and only sink current. They would be able to handle either +5 or +12 signals.
by Glen W Christen
Thu Sep 18, 2003 4:35 pm
Forum: Harris Public Safety Communications (PSPC) Equipment
Topic: S-825 dead volume control
Replies: 5
Views: 5061

S825 volume

There are at least 4 IC's involved directly with amplifying and switching the audio. The board is NLA and cost a fortune when available. Good luck.
by Glen W Christen
Thu Sep 18, 2003 4:25 pm
Forum: Harris Public Safety Communications (PSPC) Equipment
Topic: Ranger S-825 control head Voice guard Question
Replies: 1
Views: 2758

S825 voice guard

The cable is a loop in-loop/ loop-out on a pin-for-pin basis. The enable is from the switch on the front, or else has to be modified to give a remote closure.
by Glen W Christen
Wed Aug 27, 2003 9:02 am
Forum: Harris Public Safety Communications (PSPC) Equipment
Topic: Mastr Exec II vehicular repeater question
Replies: 6
Views: 6068

Vehicular repeater

My ham consultant says yes. It will work with any similar.
by Glen W Christen
Mon Aug 25, 2003 3:35 pm
Forum: Harris Public Safety Communications (PSPC) Equipment
Topic: IPE-200
Replies: 2
Views: 3715

IPE

My question is WHY? The IPE is a very poor product and not worth doing anything with.
by Glen W Christen
Mon Aug 25, 2003 3:29 pm
Forum: Harris Public Safety Communications (PSPC) Equipment
Topic: GE channel guard / private line question
Replies: 5
Views: 5895

CG/PL

If you have a choice, avoid 136.5. That is the same as the turn-off code for systems using DPL and you will have a noise burst everytime anyone unkeys using DPL on that frequency.
by Glen W Christen
Mon Aug 25, 2003 3:24 pm
Forum: Harris Public Safety Communications (PSPC) Equipment
Topic: Mastr Exec II vehicular repeater question
Replies: 6
Views: 6068

M II repeater ?

Short the center two pins of the molex connector and it should fly.
by Glen W Christen
Tue Jun 17, 2003 4:18 pm
Forum: Harris Public Safety Communications (PSPC) Equipment
Topic: My own EDACS!
Replies: 3
Views: 4469

EDACS

MANY thousands of dollars. Channels and GETC controllers are expensive.
by Glen W Christen
Tue Jun 17, 2003 4:16 pm
Forum: Harris Public Safety Communications (PSPC) Equipment
Topic: KPC programming problems
Replies: 1
Views: 2715

KPC programming

Try reading/writing tracking data to the radio using MAINTENENCE. Then write a personality to it.