Yaesu Ft840 Power

Forum dedicated to discussion on Yaesu Amateur Radio products

Moderator: willbartlett

Post Reply
jeff4570
Posts: 3
Joined: Sun Aug 15, 2004 3:21 pm
Location: Naugatuck CT

Yaesu Ft840 Power

Post by jeff4570 » Fri Apr 20, 2007 7:06 am

Im using a Bird model 43 wattmeter with a 25-50mhz slug , can I use it at all between 3-20mhz ?? I get a SIGNIFICANT loss of power on the low freq and Im wondering if its my rig or just the wattmeter.

I get 15 watts on 80m , 30watts on 40 , 75 watts on 15 and 100 watts on 20 and above.


Jeff4570@aol.com

k2hz
Posts: 150
Joined: Sun Jan 30, 2005 1:02 pm
Location: Rochester, NY

Post by k2hz » Fri Apr 20, 2007 10:30 am

That is the reason the slug is designated for 25-50MHz. The reading will be increasingly low in proportion to the frequency when used below the
design range. Bird elements are made for specific frequency and power ranges to maintain accurate calibration.

From what you describe, your rig probably has an actual 100W output on all bands. You need the 2-30MHz element for accurate readings on the HF bands.

Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest