FT-90R

Forum dedicated to discussion on Yaesu Amateur Radio products

Moderator: willbartlett

Post Reply
N3CHU
Posts: 159
Joined: Thu Jan 09, 2003 11:41 am

FT-90R

Post by N3CHU » Wed Nov 26, 2008 3:58 pm

Hi all, can anyone tell me which pins on the mic connecter are PTT and mic audio input?. thank you and any help will be greatly appreciated. Davie n 3 c h u at atlanticbb dot net

mikepdx
Posts: 5
Joined: Sat Dec 27, 2003 11:12 pm

Re: FT-90R

Post by mikepdx » Mon Dec 15, 2008 8:50 pm

see page 6 in the owner's manual:

http://www.rigpix.com/yaesu/ft90r_manual.pdf

N3CHU
Posts: 159
Joined: Thu Jan 09, 2003 11:41 am

Re: FT-90R

Post by N3CHU » Tue Dec 16, 2008 8:16 am

I have the manual and its not as it seems, I made up a 6 pin connector on a piece of six conducter wire and useing the schematic no combination of wires would work. read an article about rig blasters and it says that the ft-90 and one or two other radios are not compatable for switching by the mic connector as it dosent use an on-off switch. but thank you very much for your reply. Davie n 3 c h u at atlanticbb dot net

Post Reply

Who is online

Users browsing this forum: No registered users and 2 guests