Page 1 of 1

FT-90R

Posted: Wed Nov 26, 2008 3:58 pm
by N3CHU
Hi all, can anyone tell me which pins on the mic connecter are PTT and mic audio input?. thank you and any help will be greatly appreciated. Davie n 3 c h u at atlanticbb dot net

Re: FT-90R

Posted: Mon Dec 15, 2008 8:50 pm
by mikepdx
see page 6 in the owner's manual:

http://www.rigpix.com/yaesu/ft90r_manual.pdf

Re: FT-90R

Posted: Tue Dec 16, 2008 8:16 am
by N3CHU
I have the manual and its not as it seems, I made up a 6 pin connector on a piece of six conducter wire and useing the schematic no combination of wires would work. read an article about rig blasters and it says that the ft-90 and one or two other radios are not compatable for switching by the mic connector as it dosent use an on-off switch. but thank you very much for your reply. Davie n 3 c h u at atlanticbb dot net