Hello,
I am setting up a vx-920 in VHF for a volunteer FF. I want to have the radio setup on one channel for off duty 2 tone paging on his depts tones.
Can anyone recommend a good trusted set up parameters to get this to work?
Right now I have it working, but when the radio opens it seems to stuck at a reduced volume. I can't seem to find which parameter is causing this.
Any help appreciated.
VX-920 2 tone decode problems
Re: VX-920 2 tone decode problems
The only possibility could be the call beep level. I have mine set at 6. I looked thru both my 820 and 920 and both are set the same. If that does not work, e-mail me a copy of the programmign, I can dump it in my radio and try to finger it out.,
Paul B
Paul B
Re: VX-920 2 tone decode problems
I tried the beep level parameter with no luck.
This is a link to the codeplug
http://download.yousendit.com/8F6985593013247F
Maybe if you get it to work, It could be a hardware or firmware problem with this radio.
This is a link to the codeplug
http://download.yousendit.com/8F6985593013247F
Maybe if you get it to work, It could be a hardware or firmware problem with this radio.