VXR-1000, removing busy channel lockout

Forum dedicated to discussion on Vertex Commercial Radio products
Post Reply
rf_burns
Posts: 1
Joined: Mon Jul 30, 2012 8:10 am

VXR-1000, removing busy channel lockout

Post by rf_burns » Tue Dec 30, 2014 11:54 am

We have 4 VXR-1000 mobile repeaters, all with the same problem. They will not transmit if the VXR-1000 is picking up a signal, in our case its RFI (RF noise). It should prevent its transmit only if it has a correct CTCSS. Cranking the squelch is not an option (we've tried it anyway and the carrier squelch will open with a noisy signal).

Its been back to Vertex who "fixed it" but the issue still remains. We took a new one from the box and tried it (in case we messed up the programming) and it did the same with the default programming.

If the VXR-1000's mic is set to broadcast on both repeater and mobile radio, if the VXR-1000 squelch is open, it will not transmit on either radio.
We can't find anything in programming or in the service manual to fix this issue.

Anyone have any ideas?

Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest