Newbie question about Kenwood TK2300

If you are just getting into radio, and have a lot of beginner questions, or just want to help someone new out, then this is the place to do it!
Post Reply
Shoo
Posts: 1
Joined: Tue May 21, 2013 7:26 pm

Newbie question about Kenwood TK2300

Post by Shoo » Tue May 21, 2013 7:41 pm

Someone gave me a Kenwood TK-2300 to use. I need to be able to access the blue and green dot channels, 154.57 and 154.6. Can this 4 channel radio be programmed for those two channels and if so, how? Thanks in advance.

User avatar
ka7wnf
Posts: 362
Joined: Mon Aug 30, 2004 1:37 pm
Location: Seattle, Washington

Re: Newbie question about Kenwood TK2300

Post by ka7wnf » Sat Jun 01, 2013 12:32 pm

You need software KPG-120D to program it and cable KPG-22 to connect the radio to the computer. Might be best to take it to a Kenwood dealer or shop and pay a few bucks to have it done.

If you are so inclined the cable can be found on Ebay for under $10.00. Google KPG-120D and you can find sources to buy the software.

Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest