5100 keyloader the easy way
Posted: Thu May 22, 2008 5:28 pm
No BS it works and its easy.
1. get and XTS keyloader cable. (not a Hirose connector, haven't tried the Hirose)
2. remove the rubber boot on the accessory pin side
3. locate pins #2 and #7 **(as I have them marked)**
4. Jumper pins #2 and#7 together, reassemble and your done.
My T3011DX loads the EFJ 5100 (660GS4) and my XTS 3K both work w/ no issues.
1. get and XTS keyloader cable. (not a Hirose connector, haven't tried the Hirose)
2. remove the rubber boot on the accessory pin side
3. locate pins #2 and #7 **(as I have them marked)**
4. Jumper pins #2 and#7 together, reassemble and your done.
My T3011DX loads the EFJ 5100 (660GS4) and my XTS 3K both work w/ no issues.