Page 3 of 5

Re: Firmware-PCConfig Decode

Posted: Thu Nov 12, 2009 10:50 pm
by Jay
Yep - DOD surplus. Guess I will hold my breath....

Re: Firmware-PCConfig Decode

Posted: Fri Jan 01, 2010 10:43 am
by n7maq
Hello,

I have some units with V 4.12.4, what PCC do I need?

Re: Firmware-PCConfig Decode

Posted: Sun Jan 03, 2010 8:09 pm
by Intrinsically Safe
2.8.4

Re: Firmware-PCConfig Decode

Posted: Tue Mar 16, 2010 8:36 pm
by bezking
Hi,

Which PCC would I need for this radio? The one I've got ( 1.24.0.8 ) does not work...

Thank you!
Image

Re: Firmware-PCConfig Decode

Posted: Tue Mar 16, 2010 11:46 pm
by Intrinsically Safe
I assume this is a portable based on the controller version. In this case you need PCC 2.4.6

Re: Firmware-PCConfig Decode

Posted: Fri Apr 09, 2010 3:03 pm
by Tony.Ri
Do you know which PCC version is required for v4.4.16?

Thanks!

Re: Firmware-PCConfig Decode

Posted: Sat Apr 10, 2010 12:54 am
by Intrinsically Safe
1.28.0.8

Re: Firmware-PCConfig Decode

Posted: Sat Apr 10, 2010 3:53 am
by Tony.Ri
Intrinsically Safe wrote:1.28.0.8
Thank you! My CAP comms officer said that we use a newer version of the software for our v4 radios. Can 2.10.2 be used to program my radio, or do I absolutely need 1.28.0.8?

Thank you!

Re: Firmware-PCConfig Decode

Posted: Sat Apr 10, 2010 9:13 am
by Intrinsically Safe
V2.x.x PCC should not be used. THere is a different file format between the radio firmware and what PCC is loading in.
EFJ is VERY adamant that you use the correct version of PCC for a specific version of firmware. They are not like MOT in regards to the newest CPS is backwards compatible.
They have what they call the MATRIX that breaks down what PCC should be used for a specific version of firmware.

Re: Firmware-PCConfig Decode

Posted: Sun Apr 11, 2010 2:51 pm
by Tony.Ri
Intrinsically Safe wrote:V2.x.x PCC should not be used. THere is a different file format between the radio firmware and what PCC is loading in.
EFJ is VERY adamant that you use the correct version of PCC for a specific version of firmware. They are not like MOT in regards to the newest CPS is backwards compatible.
They have what they call the MATRIX that breaks down what PCC should be used for a specific version of firmware.
Thank you! I'll be sure to use the proper PCC.

Re: Firmware-PCConfig Decode

Posted: Tue May 11, 2010 3:32 pm
by bezking
Hi all,

Can I use PCC 2.4.8, 1.24.0.8, or 2.14.10 with a 5100ES with firmware V4.10.9?

Thanks!

Re: Firmware-PCConfig Decode

Posted: Wed May 12, 2010 1:51 pm
by Intrinsically Safe
Your post has some misleading info.
5100ES with firmware V4.10.9?
The ES series firmware starts with a 6. i.e. 6.x.x
So I can assume you meant an X platform which would have been 4.10.9, of which there is a valid release w/ that version number. In that case you should use PCC 2.6.9
If you indeed do have an ES radio, the closest match I could find would be 6.10.5 which would require PCC 2.12.6

I.S.

Re: Firmware-PCConfig Decode

Posted: Sun Jun 13, 2010 10:32 am
by bezking
Thanks, IS. One more question:

As I posted above, I have PCC 2.4.8, 1.24.0.8, and 2.14.10. Perhaps you could tell me (or tell me where to find) a list of the possible radio firmwares (I am mostly concerned with portables) that these versions would work with?

Thanks again.

Re: Firmware-PCConfig Decode

Posted: Sun Jun 13, 2010 10:31 pm
by Intrinsically Safe
5100s listed below

PCC 2.4.8
6.2.11
4.8.12

PCC 2.14.10
6.12.4

PCC1.28.0.8
1.18.15
2.8.15
3.8.14
4.4.27

Re: Firmware-PCConfig Decode

Posted: Mon Jun 14, 2010 8:28 am
by bezking
Thanks, except mine is 1.24.0.8, not 1.28.0.8 :grin: