Page 4 of 5

Re: Firmware-PCConfig Decode

Posted: Tue Jun 15, 2010 3:19 pm
by Intrinsically Safe
bezking wrote:Thanks, except mine is 1.24.0.8, not 1.28.0.8 :grin:
DOH!!

PCC 1.24.0.8
1.14.3
2.4.6
3.4.6

Re: Firmware-PCConfig Decode

Posted: Fri Jul 30, 2010 5:22 pm
by ve7ked
Hello I have a EFJ 5100 with the following specs:

Model : 242-5117-660GS4

I have two copies of PCConfigure at my disposal, PCC 2.6.11 and 2.8.2.

That being said, I have read this radio and determined that it has the following Version Information and therefore is not compatible with the PCC that I have:

File Format Version : 5.8
DSP Software Version : 4.4.1
Controller Version : 4.4.4
Boot Load Version : 4.2
SEM Version : 3.4

I am curious which PCC I will currently need to program this radio.

I am also looking to find out what PCC / Firmware I am able to upgrade to so that I have the latest and greatest in bug fixes, ect.

Any help that you are able to provide would be appreciated. I have had this radio for a while, however the reciever was dead. Thanks to the info posted on the Version 4 VHF boards by Will Bartlett, I now have a fully functional transceiver. Thanks for the invaluable help to the community Will !

Thanks in advance,

Mike, VE7KED

Re: Firmware-PCConfig Decode

Posted: Sun Aug 15, 2010 9:19 am
by Intrinsically Safe
Hey mike.

You will need PCC 1.28.0.8 for that radio
the latest release is 4.14.5 which would require PCC 2.10.2.

Re: Firmware-PCConfig Decode

Posted: Thu Oct 07, 2010 6:04 pm
by KD8FJI
What PCC is needed for firmware 1.18.8?

Re: Firmware-PCConfig Decode

Posted: Thu Oct 07, 2010 7:26 pm
by Torchwood
What PCC is needed for this EFJ 5100?

File Format ver. 5.9
DSP Software ver. 4.8.2
Controller ver 4.8.12
Boot load ver 4.3
SEM ver 3.4

Re: Firmware-PCConfig Decode

Posted: Sat Sep 03, 2011 3:35 am
by mc shaggy
i need the update for my vhf radio to do p25 trunking any help

Re: Firmware-PCConfig Decode

Posted: Fri Feb 24, 2012 2:31 pm
by jd01
Can someone tell me what version of pcc I need for a 5100 v4.10.11? Also, is this still available from EFJ?

Thanks in advance for your help.

Re: Firmware-PCConfig Decode

Posted: Fri Feb 24, 2012 5:05 pm
by QuarterWave
jd01 wrote:Can someone tell me what version of pcc I need for a 5100 v4.10.11? Also, is this still available from EFJ?

Thanks in advance for your help.
PC Configure 2.6.11 is what you want.
Contact EFJ customer service and ask for a price quote.
While you're talking to them about PCC ask how much a copy of the new firmware (4.14.5) would cost you.

Re: Firmware-PCConfig Decode

Posted: Mon Feb 27, 2012 11:10 pm
by Intrinsically Safe
Just to clear some of the confusion up on decoding PCConfig version needed..

For ES Products (5100 and 5300), the radio firmware will be in the format of 6.xx.yy
The version of PCC you will need will be 2 versions higher of the xx number.
For example, if you have a radio with 6.10.5, you will need 2.12.y PCC to program it.
As for the latest release 6.16.y, you will need PCC 2.18.y to program

For X platform radios (4.xx.yy) it is not as simple and you need a secret decoder ring most of the time :stupid:

Hope this helps a little bit.

I.S.

Re: Firmware-PCConfig Decode

Posted: Tue Apr 03, 2012 2:21 am
by jcemt911
What PCC would I need for firmware version 4.14.5?

Thanks,

Jared

Re: Firmware-PCConfig Decode

Posted: Fri Apr 20, 2012 9:20 pm
by jhjonesjr
I also need to know what PCC version is needed to program the 51SL with versions 4.14.5 and 4.8.12?

Re: Firmware-PCConfig Decode

Posted: Tue May 22, 2012 4:12 am
by jcemt911
jhjonesjr wrote:I also need to know what PCC version is needed to program the 51SL with versions 4.14.5 and 4.8.12?
4.14.5 uses PCC 2.10.2

Re: Firmware-PCConfig Decode

Posted: Tue May 22, 2012 1:03 pm
by jcemt911
jhjonesjr wrote:I also need to know what PCC version is needed to program the 51SL with versions 4.14.5 and 4.8.12?
Just confirmed that 4.8.12 uses PCC 2.10.2 also.

Re: Firmware-PCConfig Decode

Posted: Thu Jul 12, 2012 8:59 pm
by emt.micah
Dang these EFJ's are confusing.

From the model number decode thread I have:

Model 242-5318-201-AAAB
5300 Not SL/Ascend
VHF
Remote Mount
P25 Conv/Ana
No Encryption
Standard Head

I get the following numbers when I turn it on: Versions 3.17.21 and 1.26.3.

This is one of our spares at work. Several of the others from this same purchase batch were re-programmed while I was gone for the National Guard. Whoever programed them must have had their own software, cause none of mine works. I need to program this one and get it programmed digital like the others.

Which version if PCC do I need?

And I.S, thanks in advance. You've helped a ton of people with the EFJs. We appreciate it.

Re: Firmware-PCConfig Decode

Posted: Thu Jul 12, 2012 10:42 pm
by Intrinsically Safe
3.17.21 is the code version of the control head.
1.26.3 is the ARM code (main firmware) there is a separate DSP version for that radio as well but since you are not upgrading we don't need to worry about that.
You would need PCC 1.24.0.0 as that is the sanctioned version.

However if it was programmed with a higher version it may have screwed up the file formatting, which can be a pain in the arse to try and figure out how high they went.

I.S.