what PCC software is required for this uhf 5100?
242-5126-460-GM3
what PCC is required for this 5100
Moderator: willbartlett
- Intrinsically Safe
- Posts: 347
- Joined: Sat Oct 13, 2007 9:19 pm
Re: what PCC is required for this 5100
I need to know the firmware version. It is displayed upon power up right after the the viking logo.
I.S.
I.S.
Sean Penn: Last year I went to Iraq. Before Team America showed up, it was a happy place. They had flowery meadows and rainbow skies, and rivers made of chocolate, where the children danced and laughed and played with gumdrop smiles.
-
- Posts: 8
- Joined: Sat Feb 27, 2010 11:37 pm
Re: what PCC is required for this 5100
firmware version 3.10.6
it does say DSP failed after 2 self test power cycles.
it does say DSP failed after 2 self test power cycles.
- Intrinsically Safe
- Posts: 347
- Joined: Sat Oct 13, 2007 9:19 pm
Re: what PCC is required for this 5100
3.10.6 would use 1.30.2 PCC. This is a limited release so good luck getting a copy of it unless you can prove you belong to the organization that the release was made for.
The DSP fail is a semi-common issue with radios of this vintage. Most likely it is the flex between the Logic and Rf that has some crappy solder joints on it. Fixing it is a pain in the field. Most of the time you'll just end up wrecking the flex strip.
I.S.
The DSP fail is a semi-common issue with radios of this vintage. Most likely it is the flex between the Logic and Rf that has some crappy solder joints on it. Fixing it is a pain in the field. Most of the time you'll just end up wrecking the flex strip.
I.S.
Sean Penn: Last year I went to Iraq. Before Team America showed up, it was a happy place. They had flowery meadows and rainbow skies, and rivers made of chocolate, where the children danced and laughed and played with gumdrop smiles.
-
- Posts: 8
- Joined: Sat Feb 27, 2010 11:37 pm
Re: what PCC is required for this 5100
if im understanding you correctly, its NOT like Motorola where the newest version will do all radios programmed with a previous version?
- Intrinsically Safe
- Posts: 347
- Joined: Sat Oct 13, 2007 9:19 pm
Re: what PCC is required for this 5100
Your understanding, for the most part, is correct. There are some exceptions but you should use a specific version of PCC for specific version of firmware.
Sean Penn: Last year I went to Iraq. Before Team America showed up, it was a happy place. They had flowery meadows and rainbow skies, and rivers made of chocolate, where the children danced and laughed and played with gumdrop smiles.