Wilson Citi-Com II WS201

Forum dedicated to discussion on RELM/Regency/Wilson Radio products
Post Reply
glittle
Posts: 1
Joined: Tue Oct 21, 2008 12:25 am

Wilson Citi-Com II WS201

Post by glittle »

Where can I fins servicing data for a Wilson Citi-Com II? This radio is a model WS201. The FCC ID is ATE9PLWS201. I looked this up on the FCC web page and it is not listed. Was this a legal radio? The radio is currently on 858.625 Rx and 813.625 Tx. I am interested in attempting to put this radio on 902 MHz amateur band.

Thanks for any information.

73
Glenn
WB4UIV
Two way repair man
Posts: 83
Joined: Mon Apr 05, 2004 12:36 pm
Location: Melbourne, FL

Re: Wilson Citi-Com II WS201

Post by Two way repair man »

Glen,

The Wilson WS201 will not tuned to 902MHz without several modifications. You will need a service manual and I am not sure if all the parts are still available, especially the correct RF amp final in the PA. I have not serviced any crystal units in more than 10 years so my crystal manuals have gone away a long time ago. RELM (the factory) no longer supports this product as it is at least 18 years old.

The most important fact is that you will need to purchase a good quality set of crystals that have been burned in. At last check a good pair of crystals ran about $55 plus shipping.

I hope this helps.

Regards,

Bill
Post Reply