Where can I fins servicing data for a Wilson Citi-Com II? This radio is a model WS201. The FCC ID is ATE9PLWS201. I looked this up on the FCC web page and it is not listed. Was this a legal radio? The radio is currently on 858.625 Rx and 813.625 Tx. I am interested in attempting to put this radio on 902 MHz amateur band.
Thanks for any information.
73
Glenn
WB4UIV
Wilson Citi-Com II WS201
-
- Posts: 83
- Joined: Mon Apr 05, 2004 12:36 pm
- Location: Melbourne, FL
Re: Wilson Citi-Com II WS201
Glen,
The Wilson WS201 will not tuned to 902MHz without several modifications. You will need a service manual and I am not sure if all the parts are still available, especially the correct RF amp final in the PA. I have not serviced any crystal units in more than 10 years so my crystal manuals have gone away a long time ago. RELM (the factory) no longer supports this product as it is at least 18 years old.
The most important fact is that you will need to purchase a good quality set of crystals that have been burned in. At last check a good pair of crystals ran about $55 plus shipping.
I hope this helps.
Regards,
Bill
The Wilson WS201 will not tuned to 902MHz without several modifications. You will need a service manual and I am not sure if all the parts are still available, especially the correct RF amp final in the PA. I have not serviced any crystal units in more than 10 years so my crystal manuals have gone away a long time ago. RELM (the factory) no longer supports this product as it is at least 18 years old.
The most important fact is that you will need to purchase a good quality set of crystals that have been burned in. At last check a good pair of crystals ran about $55 plus shipping.
I hope this helps.
Regards,
Bill