Eprom Eraser Help

Forum dedicated to discussion on Midland Radio products. (Questions/Instructions about modifing CB radios are prohibited)
Post Reply
PantherRepeater300m
Posts: 9
Joined: Sun Mar 12, 2006 8:40 pm
Location: MT

Eprom Eraser Help

Post by PantherRepeater300m »

Hi everyone, I just bought a Midland 70-1100 Eprom eraser and I am not sure how to use it. It has a timer that goes up to 60 minutes, I need to know how many minutes the Eprom/Eproms need to be in the eraser. My guess is around 10 minutes per Eprom but I have no clue. Thanks in advance for any and all help. :D
545
Posts: 8
Joined: Sun Apr 10, 2005 8:11 am

Post by 545 »

I've had good luck using 10 - 15 minutes. I usuall verify them with the blank command before trying to write them.
Dave
Andy Brinkley
Posts: 68
Joined: Tue Jun 03, 2003 8:23 pm
Location: North Carolina

Post by Andy Brinkley »

10 - 15 minutes should be ok if your bulb is fairly new, a little longer if it is getting some age on it.

Just make sure you get the door completely closed or else you will think you are erasing and the light has never come on.

The newer 70-1100's had a small lense that glowed when the UV light was on.
Andy

--------------------------------------------------------------
NC Certified Firefighter III / EMT-A
FCC Licensed Technician / Amateur Call NC4AB
http://www.brinkleyelectronics.com
Post Reply