70-1340b user manual

Forum dedicated to discussion on Midland Radio products. (Questions/Instructions about modifing CB radios are prohibited)
Post Reply
enerconsry
Posts: 3
Joined: Sun Oct 21, 2007 10:33 am
Location: Abbotsford B.C. Canada

70-1340b user manual

Post by enerconsry » Sun Oct 21, 2007 10:37 am

Can anyone e-mail me a user manual for a model 70-1340b i just got one from a buddy at work but he had no manual for it.
Thanks.Larry
lpordan@telus.net

Techmedic
Posts: 7
Joined: Sun Dec 30, 2007 3:41 pm

Re: 70-1340b user manual

Post by Techmedic » Sun Dec 30, 2007 3:44 pm

Larry,

Advise what buttons the radio has. This affects its' operation.
Programming also affects a lot too. If you are a user with no access to programming sw then there is not much that can be done if you are not happy regarding its' operation.

enerconsry
Posts: 3
Joined: Sun Oct 21, 2007 10:33 am
Location: Abbotsford B.C. Canada

Re: 70-1340b user manual

Post by enerconsry » Mon Dec 31, 2007 9:12 am

This radio has 3 buttons scan-esc and add-dell buttons the radio works great and has 18 channels tuned in now all mostly trucker channels for B.C. and Alberta.

Thumper3
Posts: 1
Joined: Fri Feb 01, 2008 12:50 pm

Re: 70-1340b user manual

Post by Thumper3 » Fri Feb 01, 2008 12:59 pm

Any luck on obtaining that manual????? I need to reprogram my 70-1340B and I don't have a manual for it.

Couldn't find much online about it. Any good resources out there?

Thanks,
Richard

enerconsry
Posts: 3
Joined: Sun Oct 21, 2007 10:33 am
Location: Abbotsford B.C. Canada

Re: 70-1340b user manual

Post by enerconsry » Sat Feb 02, 2008 11:35 am

Still have not found a users manual but you can get the programming cable and software from this guy in Vancouver http://cgi.ebay.ca/Midland-VHF-UHF-Mobi ... dZViewItem

ka8ypy
Posts: 7
Joined: Thu Feb 01, 2007 6:15 pm
Location: MD

Re: 70-1340b user manual

Post by ka8ypy » Fri Apr 04, 2008 12:35 pm

Plenty of resources on the MidlandLMR yahoo groups.
Programmer pinouts, some manuals, software resources, etc.

Dan
KA8YPY

Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest