Question about programming a Delta EEPROM

Forum dedicated to the Harris PSPC Product group items such as Orion, M7100/M7200/M7300, P7100/P7200/P7300, Harris Unity XG-100, GE Orion, GE Master Repeaters, EDACS Trunking, Pro Voice, PC Configure, RPM, and other topics relating to Harris, MA-Comm, Ericsson, GE products.
Post Reply
User avatar
k2xm
Posts: 36
Joined: Tue Jan 22, 2002 8:00 pm
Location: Saco, Maine

Question about programming a Delta EEPROM

Post by k2xm »

:roll:

OK all you GE Delta experts, here's a question about progromming
an EEPROM for the GE Delta.

Is it absolutely necessary to use the GE suitcase programmer to
do this? The reason I ask is that we have a BP Microsystems
programmer here at work that I use to program PROMS and EEPROMS
for the products that we prototype here at work. Could I read
the current contents of my Delta's EEPROM, make the necessary
changes I want, and then reprogram?? Or is there something
special that the suitcase programmer does that they don't want
us to know about??

Thanks,
Pete
K2XM
Saco, Maine
User avatar
vcaruso
Posts: 110
Joined: Mon Jan 21, 2002 8:00 pm
Location: Passaic County, NJ

Post by vcaruso »

Pete,

I read somewhere on a website that this was possible and if I recall they also had a dos based program to create an image of the EEPROM.

Do a search on google.com i believe that is where I found the site.

If I find the url I will post it

vince
terence cost
Posts: 4
Joined: Fri May 24, 2002 8:17 pm
Location: nashport,ohio

Rangr/Delta P.C. programming

Post by terence cost »

The Rangr and Delta radio can be programmed with the TQ-3330
programmer.
I have for sale Rangr/Delta TQ-3330 programmers and programming cables.
Please e-mail me off list for pricing. Thank You, Terence N8FXB in Ohio
terence cost
Posts: 4
Joined: Fri May 24, 2002 8:17 pm
Location: nashport,ohio

Radio Data Interface (R.D.I.)

Post by terence cost »

For any of you that have a R.D.I. Radio Data Interface P1
They can be converted to a P2 TQ-3330 Rangr/Delta P.C.
programmer by removing the 27C256, U.V. erasing , and
reburning to configure as a programmer.
There are also some jumper changes.
Regards, Terence N8FXB
mike m
Posts: 74
Joined: Wed Jan 23, 2002 8:00 pm

Post by mike m »

Simple guys the answer is on this page in the Ge/Ericsson section, go to model specific information for GE/comnet ericsson and check out the 'Phoenix radio' web page it has links to the 2212 style DRAM programmer and also free software which makes the suitcase programmer look like a dinosaur. Also check out the link to VO1CPUs web page, Gary marsh, as he did the early dos based software and the original prom programmer for the 2212 series DRAMs which is used in the Deltas, Rangrs and Phoenix series radios.

Mike
User avatar
vcaruso
Posts: 110
Joined: Mon Jan 21, 2002 8:00 pm
Location: Passaic County, NJ

Post by vcaruso »

Just in case you get on the board directly the page mike m is refering to is http://www.radtek.ws

Click the link for GE\Ericsson and go to town

By the way I'll be adding more links this weekend.

Vince
Post Reply