EDACS 500M Program Mode

Forum dedicated to the Harris PSPC Product group items such as Orion, M7100/M7200/M7300, P7100/P7200/P7300, Harris Unity XG-100, GE Orion, GE Master Repeaters, EDACS Trunking, Pro Voice, PC Configure, RPM, and other topics relating to Harris, MA-Comm, Ericsson, GE products.
Post Reply
ericmilne
Posts: 1
Joined: Mon Nov 28, 2005 10:05 pm

EDACS 500M Program Mode

Post by ericmilne »

How do you place the EDACS 500M into the programming mode?
User avatar
n_zero_ndp
Posts: 389
Joined: Sun Feb 24, 2002 8:10 pm
Location: Where P25 Trunking is KING

Re: EDACS 500M Program Mode

Post by n_zero_ndp »

ericmilne wrote:How do you place the EDACS 500M into the programming mode?
radios with a flashcode lower than R5A exibit a problem of properly entering the programming mode......

start with the radio turned off - connect the programming cable

press and hold the SCAN button and the + button and power on the radio

release the buttons - if radio enters the programming mode correctly PROG will appear on the display
Glen W Christen
Posts: 46
Joined: Mon Feb 03, 2003 12:46 pm

500 M Programming mode

Post by Glen W Christen »

Normal is to connect the CORRECT cable, turn it on, and goes to PROG. However - even some brand-new radios with V47xxx you have to press scan, +, -, and power up to get it into PROG.
Post Reply