Problem Programming Orion with HHCH

Forum dedicated to the Harris PSPC Product group items such as Orion, M7100/M7200/M7300, P7100/P7200/P7300, Harris Unity XG-100, GE Orion, GE Master Repeaters, EDACS Trunking, Pro Voice, PC Configure, RPM, and other topics relating to Harris, MA-Comm, Ericsson, GE products.
Post Reply
User avatar
USPSS
Posts: 11
Joined: Thu May 23, 2002 12:42 pm
Location: Castaic, CA

Problem Programming Orion with HHCH

Post by USPSS »

Hi,

When the radio is turned on thru the HHCH it activated but it will not use any of the controls on the Hand Held Controller. I remove the cable on the TX/RX pack and put the programming cable inline and the head no longer activates the radio???
I cannot access the radio with the programming software.

I used the same software and programming cable on 2 orions today and 2 M7100's and it all worked fine, those are all remote with System Heads.

I am now lost since it seems that there is something I am missing.

Thanks

STan
Stan Glass
Owner
USPSS
Manufacturer of BADGES and PATCHES for Public Safety worldwide.
dbrock411
Posts: 10
Joined: Sat Mar 22, 2003 12:03 pm
Location: Daytona Beach, FL

Post by dbrock411 »

Stan - did you set the control head type in programmer to the hand-held unit?
Post Reply