P5100 Programming problem

Forum dedicated to the Harris PSPC Product group items such as Orion, M7100/M7200/M7300, P7100/P7200/P7300, Harris Unity XG-100, GE Orion, GE Master Repeaters, EDACS Trunking, Pro Voice, PC Configure, RPM, and other topics relating to Harris, MA-Comm, Ericsson, GE products.
Post Reply
cgroftmc
Posts: 6
Joined: Wed Mar 10, 2004 11:00 pm

P5100 Programming problem

Post by cgroftmc »

I am trying to read a P5100. I am getting a "Can not initialize radio, check connections....." I have a Jag 700P that works fine with my set up. The 5100 goes into programming mode fine. I am using Programmer Ver 16. Any thoughts? Thanks!!
jim202
Posts: 120
Joined: Sat Mar 29, 2003 9:47 am
Location: New Orleans region

Re: P5100 Programming problem

Post by jim202 »

You will need a copy of the EFJ program called PCONFIG. There are a number of different versions out there. The one you need will depend on
what version was last used on the radio. You will also need the programming cable EFJ part number 023-5100-920.

Jim
JungleJim
Posts: 28
Joined: Sat Oct 27, 2007 12:32 pm

Re: P5100 Programming problem

Post by JungleJim »

What type of programming cable are you using?
What is the flash code version of the radio?
Post Reply