PCS

Forum dedicated to the Harris PSPC Product group items such as Orion, M7100/M7200/M7300, P7100/P7200/P7300, Harris Unity XG-100, GE Orion, GE Master Repeaters, EDACS Trunking, Pro Voice, PC Configure, RPM, and other topics relating to Harris, MA-Comm, Ericsson, GE products.
Post Reply
FiremanSparky
Posts: 11
Joined: Thu Jun 10, 2004 4:29 am
Location: Jefferson County Colorado

PCS

Post by FiremanSparky »

Silly question...........How do you put a PCS trunked Radio into the programming mode?

Thanks,
Frank
User avatar
n_zero_ndp
Posts: 389
Joined: Sun Feb 24, 2002 8:10 pm
Location: Where P25 Trunking is KING

Re: PCS

Post by n_zero_ndp »

FiremanSparky wrote:Silly question...........How do you put a PCS trunked Radio into the programming mode?

Thanks,
Frank
Programming mode: Press and hold one of the System/Group/Channel buttons
and one of the Volume Up/Down buttons simultaneously. Turn the radio ON.

If the radio enters the programming mode correctly, the PC icon will turn ON
and "Prog" will appear in the display.
FiremanSparky
Posts: 11
Joined: Thu Jun 10, 2004 4:29 am
Location: Jefferson County Colorado

Re: PCS

Post by FiremanSparky »

Hello n_zero_ndp

I had tried that method, and as it turns out, on this particular radio you have to press hard on both. The radio is up and running fine now. Thank you for the reply.

Frank
Post Reply