Hello all,
Is there a way to change the minimum volume on the Orion? I have a setup at home and I found that even at volume setting of 1 it is still louder than I want. I don't know if it is possible or not.
Thank you,
D
Orion Volume
Re: Orion Volume
one (1) is as low as it will go. If that is still to loud try another speaker such as an 8 or 16 ohm. Another trick used quite often is an L-pad. It is a volume control that taps directly into the speaker line and gives you true analog control of the speaker volume.
Re: Orion Volume
Thanks for the tips, I probably will try a different speaker, for some reason it didn't cross my mind
- n_zero_ndp
- Posts: 389
- Joined: Sun Feb 24, 2002 8:10 pm
- Location: Where P25 Trunking is KING
Re: Orion Volume
ORION can be programmed to a minimum volume of ZERO. I don't know if that actually means
no sound output but it is programmable to ZERO.
no sound output but it is programmable to ZERO.
Re: Orion Volume
I haven't tried 0 but changing the minimum volume on EDACS3 don't seem to change anything.
Re: Orion Volume
A volume of zero means just that, no audio out.
Re: Orion Volume
I put in a 100 ohm resistor in line with the speaker, all is well now. The volume knob actually "works"!