Ge RIB programmer ????(help)

Forum dedicated to the Harris PSPC Product group items such as Orion, M7100/M7200/M7300, P7100/P7200/P7300, Harris Unity XG-100, GE Orion, GE Master Repeaters, EDACS Trunking, Pro Voice, PC Configure, RPM, and other topics relating to Harris, MA-Comm, Ericsson, GE products.
Post Reply
kc4sbj
Posts: 10
Joined: Wed Nov 05, 2003 5:19 pm
Location: near Dallas

Ge RIB programmer ????(help)

Post by kc4sbj »

i have been trying to programm a GE ranger uhf for the 440 hAM BAND i have a RIB programming i made up some cable like the book said to do so and my PC knows the RIB is their but keep getting error. The rib tell me that their is a (when writing )when reading it just askes to save it. i have check the cables over and over and remade them aND FOUND NOTHING WRONG. I know the baud rate has to be no less than 4800 i have reset this to ever setting no help with that. so my ?? is what could be wrong. oh i know about the port setting has already be set. i have done everthing i know to do

the error is (error during data loading) this is when you are writing it
Post Reply