Bendix King Programming Instructions

This forum is created for the discussion of Bendix King Radios.

Moderator: mancow

Post Reply
posse401
Posts: 5
Joined: Tue Nov 16, 2004 11:56 pm
Location: Nor Cal

Bendix King Programming Instructions

Post by posse401 » Wed Nov 17, 2004 1:48 pm

Does anyone have a copy of the field programming instructions for the Bendix King EPH series radios? I have not been able to find anything online. If you could post of PM that would be great.

Thanks.

mancow
Posts: 71
Joined: Tue Jan 22, 2002 8:00 pm

Post by mancow » Sun Nov 21, 2004 12:53 pm

http://www.coleygroup.com/commrepairdepot/BKProgram.pdf


This is a pdf of the factory manual.

Back off the BKProgram.pdf part of the above URL and you'll find all kinds of BK goodies.


mancow

Birken Vogt
Posts: 29
Joined: Tue Nov 15, 2005 12:37 pm

Post by Birken Vogt » Tue Nov 15, 2005 12:48 pm

You don't have to have the programming adapter button either. Just pull off the rubber side cover, there is a 6 pin connector there. Jam a key or pocketkife in the back two (upper and lower) contacts while holding the FCN key and it will go into programming mode that way. We use that feature all the time in the fire service

Birken

Jim1348
Posts: 44
Joined: Tue Aug 17, 2004 1:06 pm

Bendix King Programming Instructions

Post by Jim1348 » Sun Mar 09, 2008 10:35 pm

I just got an old UHF Bendix King, but when I put it in the programming mode it doesn't stay in that mode. It almost seems like the battery is shot. Will a bad battery cause this to happen?

User avatar
ai4ui
Posts: 17
Joined: Tue May 22, 2007 7:51 am
Location: Hung by the neck with a rope until I was dead, dead, dead...

Re: Bendix King Programming Instructions

Post by ai4ui » Wed Mar 12, 2008 10:27 pm

If it cycles power due to a battery problem then that will cause it to exit program mode. NIFC has some nice programming instructions you can print and laminate for your wallet or pocket if you want.

See http://www.fireradios.net/

Regards

Robert

Post Reply

Who is online

Users browsing this forum: Bing [Bot] and 1 guest