IC-F121 Power on beep

Forum dedicated to discussion on Icom Commercial Radio products such as F70, F80, F1721, F2821, F9011, F9021, F9411, F9521, F9511HT.
Post Reply
User avatar
ka7wnf
Posts: 363
Joined: Mon Aug 30, 2004 1:37 pm
Location: Seattle, Washington

IC-F121 Power on beep

Post by ka7wnf »

Okay, How do I disable the beep when the F121 is turned on? I don't see any menu settings nor did I see it in the set mode in the manual. It's very annoying. Thanks, Peter.

jsikora
Posts: 99
Joined: Thu May 12, 2005 12:51 pm

Re: IC-F121 Power on beep

Post by jsikora »

delete power on text.
can ya hear me now...

User avatar
ka7wnf
Posts: 363
Joined: Mon Aug 30, 2004 1:37 pm
Location: Seattle, Washington

Re: IC-F121 Power on beep

Post by ka7wnf »

Oh, that should be easy enough. I'll do it tomorrow, thanks for the quick reply.

User avatar
ka7wnf
Posts: 363
Joined: Mon Aug 30, 2004 1:37 pm
Location: Seattle, Washington

Re: IC-F121 Power on beep

Post by ka7wnf »

That worked, thank you so much for the tip. That beep would have driven me nuts. Does that also work on the F1020 radios? I think they beep on power up as well.

Update. Yes it does work on the older F1020 radios.

jpeted307
Posts: 2
Joined: Mon Feb 06, 2012 11:53 pm

Re: IC-F121 Power on beep

Post by jpeted307 »

U can also turn the volume down. The control is behind the microphone jack, just unplug the mic and look in the jack it is mounted on the board at the back of the jack.

Post Reply