Page 1 of 1

CTCSS Problem with Kenwood TK-3107

Posted: Wed Sep 27, 2006 12:24 pm
by SkndrVoip
when Im enter same "QT/DQT" value in both TK-3107 I can't tallk and hear from other TK-3107 also same thing in other TK-3107 that have the same value of "QT/DQT" can't tallk and can't hear even if Im remove "QT/DQT" value from one of both TK-3107 then I can only hear in the one that im removing the "QT/DQT" from it but I can't tallk to other TK-3107 that have the value of QT/DQT,

how can i use this feature i have programing cable KPG-22 and KPG55D for TK-3107

plz help

Posted: Thu Sep 28, 2006 11:58 am
by n5tbu
Are you putting a QT/DQT in both encode and decode fields on each radio?
mod

Posted: Thu Sep 28, 2006 2:46 pm
by SkndrVoip
yes in each radio im enter same value in QT/DQT Enc | Dec

Image

Posted: Thu Sep 28, 2006 5:16 pm
by n5tbu
In that case,if the codes are the same for encode and decode per radio...it should work!You could try going to test mode and turning up the Qt/dqt deviation...Maybe they are defective?
mod

Posted: Fri Sep 29, 2006 1:27 pm
by SkndrVoip
i cant access to Test Mode im get error in connection while i can read and write to radio maybe because im not use the orignal cable im using modified cable for KPG-22 ,

so did you have any idea to access the Test Mode is there special way to access it

Posted: Fri Sep 29, 2006 2:16 pm
by n5tbu
Ok,from the looks of your screen shot,you are using a windows dos window to run the program.You need to be in pure dos,as in restart windows in dos mode,then your radio will program properly and you should be able to get in test mode.
mod

Posted: Fri Sep 29, 2006 3:06 pm
by SkndrVoip
did you think the test mode will be work in DOS ?

Posted: Fri Sep 29, 2006 5:52 pm
by n5tbu
Yes,I do...I also think the CTCSS will program correctly and work from DOS!
mod