I'm looking at the possibility of buying a kenwood D700A to replace two radios that I use in the fire service. I understand that there may be an upgrade that allows the radios to operate in the PS frequency bands, and I'm curious as to how reliable and functional they might be. I would appreciate any advice/recommendation/report on this radio. Thanks in advance.
Cap1813
Kenwood D700A
Moderator: willbartlett
Re: Kenwood D700A
While it is not illegal to modify an amateur radio, using it on public service frequencies is, as it is not type accepted for use on those frequencies. There have been instances in the past where municipalities were fined by the FCC for using modified amateur radios on public service freqs.cap1813 wrote:I'm looking at the possibility of buying a kenwood D700A to replace two radios that I use in the fire service. I understand that there may be an upgrade that allows the radios to operate in the PS frequency bands, and I'm curious as to how reliable and functional they might be. I would appreciate any advice/recommendation/report on this radio. Thanks in advance.
Cap1813
Thanks for the reply k2xm. I do know of public safety agencies that are using them for interoperability, and from what I've heard, they like this radio in that application. You'd think that the FCC would allow this modification for interoperability since it is a DHS hot topic. I've heard that there is a MARS/CAP modification that can be done for this purpose, but am not sure of elegibilty requirements for this modification. I'm definately trying to learn more so my dept is not one of those who are cited. Again any guidance or recommendations are welcome and appreciated.
Cap1813
Cap1813
Steve
The MARS/CAP modification is pure BS. Ham radios are not allowed for MARS or CAP use because they do not meet current technical standards for these services.
Ham radios are not designed for Public Safety use. They do not meet technical standards. The maunfacturer's specs generally say guaranteed only in the ham bands so they are subject to further degredation when modified to operate on other frequencies. Of particular concern is spurious emissions from the transmitter causing interference which is how the FCC can become involved when an agency uses these radios.
You would not buy a garden hose from KMart to fight a fire and you should stick to professional grade equipment for your communications.
Ham radios are not designed for Public Safety use. They do not meet technical standards. The maunfacturer's specs generally say guaranteed only in the ham bands so they are subject to further degredation when modified to operate on other frequencies. Of particular concern is spurious emissions from the transmitter causing interference which is how the FCC can become involved when an agency uses these radios.
You would not buy a garden hose from KMart to fight a fire and you should stick to professional grade equipment for your communications.
Since it appears that you need both VHF and UHF capability, check out the line of Kenwood commercial radios. The TK790 (VHF) & TK890 (UHF) can be combined with one control head to give you both bands.cap1813 wrote: Again any guidance or recommendations are welcome and appreciated.
Cap1813
Stick to commercial radio equipment, you'll be glad you did!
and remember that anytime someone uses non part-90 certified gear, they put the system license in jeopardy. as others have pointed out, ham gear isn't designed for the duty cycle or demands of public safety use nor does much of it meet technical standards for commercial use. Not to mention liability, imagine how lawyers would have a field day if such equipment is used for "mission critical" applications and something tragic happens. Not worth it. Buy the real deal. Doing anything else is a disservice to those who depend on the radios and systems to work in the worst.cap1813 wrote:Thanks for the reply k2xm. I do know of public safety agencies that are using them for interoperability, and from what I've heard, they like this radio in that application. You'd think that the FCC would allow this modification for interoperability since it is a DHS hot topic. I've heard that there is a MARS/CAP modification that can be done for this purpose, but am not sure of elegibilty requirements for this modification. I'm definately trying to learn more so my dept is not one of those who are cited. Again any guidance or recommendations are welcome and appreciated.
Cap1813
they are hobbyist radios not gear meant for industrial use.