kenwood tk-272G

Forum dedicated to discussion on Kenwood Commercial Radio products

Moderator: willbartlett

Post Reply
User avatar
westcoaster
Posts: 74
Joined: Thu Aug 04, 2005 12:22 am

kenwood tk-272G

Post by westcoaster » Thu Apr 13, 2006 11:07 pm

kenwood tk-272G. Is this radio field programmable?

Thanks,
Jarl

Firefighter15
Posts: 6
Joined: Mon Feb 13, 2006 4:52 pm

Post by Firefighter15 » Tue May 23, 2006 12:14 am

the 272's dont have the DTMF keypad on the front so the unit is not field programable, unless you have a laptop, software, and cables in that particular field. by the way, the 272's will take the same prog as the 270g's so you can have more than 32 channels

User avatar
westcoaster
Posts: 74
Joined: Thu Aug 04, 2005 12:22 am

Post by westcoaster » Fri May 26, 2006 2:02 am

Thanks for the reply!

n5tbu
Posts: 411
Joined: Fri Aug 30, 2002 7:20 am
Location: Opelousas,La.

Post by n5tbu » Sat May 27, 2006 9:06 pm

Let me check a manual at he office tuesday....later Kenwoods don't use the keypad for programming,they use the channel selector and the PTT button.
mod

n5tbu
Posts: 411
Joined: Fri Aug 30, 2002 7:20 am
Location: Opelousas,La.

Post by n5tbu » Thu Jun 01, 2006 12:59 pm

Sorry it took so long to get back to you...yes it is field programmable,unless you have the trunking board installed..This needs to be enabled with PC software. and you need to remove D17
To see if yours was enabled hold down the button below the PTT and the front solid circle button and power on the unit hold for 2 seconds then release those 2 buttons.self will be displayed.
mod

User avatar
westcoaster
Posts: 74
Joined: Thu Aug 04, 2005 12:22 am

Post by westcoaster » Thu Jun 01, 2006 8:28 pm

Thankyou for the reply and the directions!

Post Reply

Who is online

Users browsing this forum: No registered users and 2 guests