Unknown Kenwood

Forum dedicated to discussion on Kenwood Commercial Radio products

Moderator: willbartlett

Post Reply
flyinggem
Posts: 1
Joined: Sun Dec 16, 2007 1:39 pm

Unknown Kenwood

Post by flyinggem »

Hello,

New to this stuff. I have a radio but not the control head. The plate which contains the serial numbers etc... has TK-630H, TK-730H and SVR-200UD It has three FCC ID's and someone did write LB on it with permanent marker. Is this just the TK-630 part of a set? It seems almost as long as two modern radios.
flyinggem
User avatar
ka7wnf
Posts: 365
Joined: Mon Aug 30, 2004 1:37 pm
Location: Seattle, Washington

Re: Unknown Kenwood

Post by ka7wnf »

Sounds like you have the 630H deck of the vehicular repeater.

http://www.pyramidcomm.com/svr200.html
PCSAR 4x4 652
Posts: 15
Joined: Mon Jun 01, 2009 9:55 pm

Re: Unknown Kenwood

Post by PCSAR 4x4 652 »

I bought the exact same setup complete on ebay a month ago. Do you have just one rf deck and no accy's?
The 630 is probably a type 2 (36-42Mhz) in SP Tune mode, the 730 is 150 - 174 MHz - and the svr200ud is mounted to the 730h right and says futronics?
Post Reply