TK-7180 programming info and part needed

Forum dedicated to discussion on Kenwood Commercial Radio products

Moderator: willbartlett

Post Reply
User avatar
KF4SQB
Posts: 166
Joined: Tue Dec 16, 2003 12:42 am
Location: Moultrie GA

TK-7180 programming info and part needed

Post by KF4SQB »

First, what software and programming adapter do I need to program a TK-7180?

Second, I need an internal speaker for the same radio. New or used is fine, as long as its in good condition and works properly.
Brett Kitchens
KF4SQB

kf4sqb "at" wetsnet "dot" com

Of all the things I've lost, it's my mind I miss the most.......
kj4evc
Posts: 3
Joined: Sun May 10, 2009 11:05 pm

Re: TK-7180 programming info and part needed

Post by kj4evc »

software is kpg-89dk windows base software. kpg-46 programming cable. for the speaker go to www.pacparts.com and do a search under kenwood then tk7180 it list the speaker part # T07-0757-05 hope ths helps.
User avatar
ka7wnf
Posts: 365
Joined: Mon Aug 30, 2004 1:37 pm
Location: Seattle, Washington

Re: TK-7180 programming info and part needed

Post by ka7wnf »

Your KPG4 circuit will work on this radio. It doesn't use pin 1 or 8.
Post Reply