TK-880 Power Up problem

Forum dedicated to discussion on Kenwood Commercial Radio products

Moderator: willbartlett

Post Reply
Posts: 2
Joined: Sat Feb 04, 2006 8:54 pm

TK-880 Power Up problem

Post by kc8owl » Sun Nov 08, 2009 9:01 pm

Today, after making some programming changes to my UHF TK-880 and uploading the changes I found that the unit would not power up unless I had the programming cable (connected to the serial port of the PC) plugged in to the mic jack. As long as the programming cable is plugged in, the radio will power up but when I plug in the mic (or leave the jack empty) the radio will not power up.

Has anyone ever seen this before? If so, what can be done to fix the problem. This is odd because the radio has worked fine for quite a long time prior to this.

Thanks .... Mike

Thanks ... Mike KC8OWL

Post Reply

Who is online

Users browsing this forum: No registered users and 4 guests