TK-830(G) Programing

Forum dedicated to discussion on Kenwood Commercial Radio products

Moderator: willbartlett

Post Reply
CDX825
Posts: 8
Joined: Sun May 23, 2010 2:44 am
Location: Litchfield, Ohio

TK-830(G) Programing

Post by CDX825 »

Just wondering what software I need to program a TK-830(G)
-Justin

To many radios to little time
User avatar
ka7wnf
Posts: 365
Joined: Mon Aug 30, 2004 1:37 pm
Location: Seattle, Washington

Re: TK-830(G) Programing

Post by ka7wnf »

KPG-7D.
CDX825
Posts: 8
Joined: Sun May 23, 2010 2:44 am
Location: Litchfield, Ohio

Re: TK-830(G) Programing

Post by CDX825 »

Whats the newest version and where can I find it?

Thanks!
-Justin

To many radios to little time
User avatar
ka7wnf
Posts: 365
Joined: Mon Aug 30, 2004 1:37 pm
Location: Seattle, Washington

Re: TK-830(G) Programing

Post by ka7wnf »

Just do a Google search. You might find a dealer that still sells it. I beleive 2.01 is the version. There were only 2. Version 1 had some flaws but you can't even find it now.
User avatar
ka7wnf
Posts: 365
Joined: Mon Aug 30, 2004 1:37 pm
Location: Seattle, Washington

Re: TK-830(G) Programing

Post by ka7wnf »

Just do a Google search. You might find a dealer that still sells it. I beleive 2.01 is the version. There were only 2. Version 1 had some flaws but you can't even find it now.
User avatar
ka7wnf
Posts: 365
Joined: Mon Aug 30, 2004 1:37 pm
Location: Seattle, Washington

Re: TK-830(G) Programing

Post by ka7wnf »

Just do a Google search. You might find a dealer that still sells it. I beleive 2.01 is the version. There were only 2. Version 1 had some flaws but you can't even find it now.
CDX825
Posts: 8
Joined: Sun May 23, 2010 2:44 am
Location: Litchfield, Ohio

Re: TK-830(G) Programing

Post by CDX825 »

Okay Ive got it.

I was under the assumption that the G radios did narrow band. I dont see anything in the software that would suggest that. I must be missing something?
-Justin

To many radios to little time
User avatar
ka7wnf
Posts: 365
Joined: Mon Aug 30, 2004 1:37 pm
Location: Seattle, Washington

Re: TK-830(G) Programing

Post by ka7wnf »

Under Model select radio type and keep going until you see a screen that shows the frequency ranges. The last 5 lines will show W/N. If you select one of those it will allow wide and narrow programmed in on a per channel basis. The SP tune will allow out of band programming. If you PM me your email address I can send you the programming manual.
If you read a radio and it doesn't show as W/N then it will need to be redone from scratch.
CDX825
Posts: 8
Joined: Sun May 23, 2010 2:44 am
Location: Litchfield, Ohio

Re: TK-830(G) Programing

Post by CDX825 »

Got your email and figured things out. Thanks!!
-Justin

To many radios to little time
Garyf629
Posts: 10
Joined: Sat Dec 13, 2003 3:55 pm

Re: TK-830(G) Programing

Post by Garyf629 »

ka7wnf wrote: If you read a radio and it doesn't show as W/N then it will need to be redone from scratch.
What do you mean "Then it will need to be redone from scratch."

Thanks
User avatar
ka7wnf
Posts: 365
Joined: Mon Aug 30, 2004 1:37 pm
Location: Seattle, Washington

Re: TK-830(G) Programing

Post by ka7wnf »

You will need to write a new file. The radio has to be told it's a W/N capable radio in the initial settings. Just like you need to tell it what frequency and band split it is. Hope this helps.
Post Reply