KMC-9c 8 pin to 6?

Forum dedicated to discussion on Kenwood Commercial Radio products

Moderator: willbartlett

Post Reply
CDX825
Posts: 8
Joined: Sun May 23, 2010 2:44 am
Location: Litchfield, Ohio

KMC-9c 8 pin to 6?

Post by CDX825 »

Is it possible to wire a KMC-9c 8 pin to a 6 pin used on a TK-730?
-Justin

To many radios to little time
Andy Brinkley
Posts: 68
Joined: Tue Jun 03, 2003 8:23 pm
Location: North Carolina

Re: KMC-9c 8 pin to 6?

Post by Andy Brinkley »

You can make an adapter by purchasing a RJ45 Female to RJ45 Female Coupler, plug the KMC-9 in one side and use a 6 pin straight through cable on the other and you should be in business. (The center pins on the 8 pin connector match the 6 pins for the TK series radio)
Andy

--------------------------------------------------------------
NC Certified Firefighter III / EMT-A
FCC Licensed Technician / Amateur Call NC4AB
http://www.brinkleyelectronics.com
CDX825
Posts: 8
Joined: Sun May 23, 2010 2:44 am
Location: Litchfield, Ohio

Re: KMC-9c 8 pin to 6?

Post by CDX825 »

Worked great! Thanks!
-Justin

To many radios to little time
Post Reply