Kenwood KRK-7DB question

Forum dedicated to discussion on Kenwood Commercial Radio products

Moderator: willbartlett

Post Reply
Stan Wright
Posts: 7
Joined: Sun Oct 23, 2005 11:49 am
Location: Bedford, IN

Kenwood KRK-7DB question

Post by Stan Wright »

I bought a TK-790 and a TK-890 separately from Ebay. The TK-890 had previously been part of a dual band setup and has the the KRK-7 end cap (for lack of a better word) on it. The TK-790 has the end cap for a remote head...it has the plugin for the remote head and no plugin for a second radio. A guy is selling a KRK-7 end cap on Ebay that I think would work, but here is my question:

Is there a second smaller cable that runs from the main radio to the end cap that I would need? I can't find a parts list for the kit or a good detailed picture of the KRK-7 kit.
Elighting
Posts: 54
Joined: Fri Feb 03, 2006 7:25 pm
Location: Chattanooga,TN/Bryant,AL

Re: Kenwood KRK-7DB question

Post by Elighting »

On the caps of the 7DB's, one needs to say to control head and radio 2 and the other says to radio 1.The second radio (the one not connected to the control head) will need slight modifications to work properly.

Jordan
Post Reply