I have to program an ICOM F11. I do not see DPL as a selection in the programming SW. I have Ver. 1.2
Do I need a newer version? If so, which one? The ICOM site says teh F11S does DPL. IS tha a different radio?
Thanks
John
Can an ICOM F11 do DPL?
-
- Posts: 35
- Joined: Tue Oct 24, 2006 7:57 pm
- Location: New Britain, PA
Re: Can an ICOM F11 do DPL?
Version 1.2 appears to be the latest.
The F11 will do DPL. but there is no pull down list as there is for tone.
In the tone box, simply type your DPL code followed by either N or I (normal or inverted) and it will go.
example 632N
F11S is the same radio except only two channels
BJ
The F11 will do DPL. but there is no pull down list as there is for tone.
In the tone box, simply type your DPL code followed by either N or I (normal or inverted) and it will go.
example 632N
F11S is the same radio except only two channels
BJ
-
- Posts: 35
- Joined: Tue Oct 24, 2006 7:57 pm
- Location: New Britain, PA
Re: Can an ICOM F11 do DPL?
That works as you say.
Thank You.
Regards
John
Thank You.
Regards
John