Fireman5,
The Regency RFH252B can only be programmed two ways. The easiest is using the Regency RFP hand held programmer. It has a multicolor ribbon cable and a gray ribbon cable with a red stripe down one side. It plugs into the inside of the radio. You might get lucky and find one on Ebay.
The other way requires a working Regency 10 channel like a RH250, or XLH250, or RU150, or the Wilson WH2510, or WU1510. You would need to be able to remove the EEProm, solder it into one of the aforementioned radios, program it and then re-install it into the RFH252.
Or I can program it for you. Assuming that the radio is in working condition, I can program and align the radio for $25 plus shipping.
If you are interested please contact me offline: billsracing2004 at juno dot com
I hope this helps.
Regards,
Bill
vhf regency help
-
- Posts: 83
- Joined: Mon Apr 05, 2004 12:36 pm
- Location: Melbourne, FL
Re: vhf regency help
any one know where u can D/L a manual for free?? i have a 10ch slant face.
i got it programed and using it as a scanner just would be nice to look at a manual to know what else it can do...
i got it programed and using it as a scanner just would be nice to look at a manual to know what else it can do...